Dell OptiPlex 7020 Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 19
Installing the Speaker, Memory Module Guidelines, To ensure optimal performance of your computer
View all Dell OptiPlex 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Disconnect the speaker cable from the system board and release it from the securing tab inside the chassis. Press the speaker-securing tab, and slide the speaker towards the right of the computer to release it. Installing the Speaker 1. Place the speaker at the appropriate location on the chassis. 2. Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it. 3. Guide the speaker cable through the securing tab and connect the speaker cable to the system board. 4. Install the: a. drive cage b. optical drive c. cover 5. Follow the procedures in After Working Inside Your Computer. Memory Module Guidelines To ensure optimal performance of your computer, observe the following general guidelines when configuring your system memory: • Memory modules of different sizes can be mixed (for example, 2 GB and 4 GB). But, all populated channels must have identical configurations. • Memory modules must be installed beginning with the first socket. NOTE: The memory sockets in your computer may be labeled differently depending on the hardware configuration. For example, A1, A2 or 1,2,3. • If the quad-rank memory modules are mixed with single or dual-rank modules, the quad-rank modules must be installed in the sockets with the white release levers. • If memory modules with different speeds are installed, they operate at the speed of the slowest installed memory modules. 19