Dell OptiPlex 7020 Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 28

Installing the Heat Sink Assembly, Connect the fan cable to the system board.

Get Dell OptiPlex 7020 PDF manuals and user guides View all Dell OptiPlex 7020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

3. Using both hands, push away the two release handles while lifting the fan shroud upward and off the computer. 4. Disconnect the fan cable from the system board. Loosen the captive screws, lift the heat sink assembly and then remove it from the computer. Installing the Heat Sink Assembly 1. Place the heat-sink assembly into the chassis. 2. Tighten the captive screws to secure the heat-sink assembly to the system board. 3. Connect the fan cable to the system board. 4. Place the fan shroud on the fan and push to click in place. 5. Install the cover 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
3.
Using both hands, push away the two release handles while lifting the fan shroud upward and off the
computer.
4.
Disconnect the fan cable from the system board. Loosen the captive screws, lift the heat sink
assembly and then remove it from the computer.
Installing the Heat Sink Assembly
1.
Place the heat-sink assembly into the chassis.
2.
Tighten the captive screws to secure the heat-sink assembly to the system board.
3.
Connect the fan cable to the system board.
4.
Place the fan shroud on the fan and push to click in place.
5.
Install the cover
28