Dell OptiPlex 7020 Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 26
Installing the Power Supply, optical drive
View all Dell OptiPlex 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
6. Push in on the blue release tab and slide the power supply towards the front of the computer. 7. Lift the power supply out of the computer Installing the Power Supply 1. Place the power supply in the chassis and slide towards the back of the computer to secure it. 2. Tighten the screws securing the power supply to the back of the computer. 3. Connect the 4-pin and 8-pin power cables to the system board. 4. Thread the power cables into the chassis clips. 5. Install the: a. drive cage b. optical drive c. front bezel d. cover 6. Follow the procedures in After Working Inside Your Computer. 26
6.
Push in on the blue release tab and slide the power supply towards the front of the computer.
7.
Lift the power supply out of the computer
Installing the Power Supply
1.
Place the power supply in the chassis and slide towards the back of the computer to secure it.
2.
Tighten the screws securing the power supply to the back of the computer.
3.
Connect the 4-pin and 8–pin power cables to the system board.
4.
Thread the power cables into the chassis clips.
5.
Install the:
a.
drive cage
b.
optical drive
c.
front bezel
d.
cover
6.
Follow the procedures in
After Working Inside Your Computer
.
26