Dell OptiPlex 7020 Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 27
Removing the Coin-Cell Battery, Installing the Coin-Cell Battery, Removing the Heat Sink Assembly
View all Dell OptiPlex 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. cover b. front bezel c. drive cage 3. Press the release latch away from the battery to allow it to pop-up from the socket and then lift the coin-cell battery out of the computer. Installing the Coin-Cell Battery 1. Place the coin-cell battery into its slot on the system board. 2. Press the coin-cell battery downward until the release latch springs back into place and secures it. 3. Install the: a. drive cage b. front bezel c. cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Heat Sink Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover 27
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
front bezel
c.
drive cage
3.
Press the release latch away from the battery to allow it to pop-up from the socket and then lift the
coin-cell battery out of the computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into its slot on the system board.
2.
Press the coin-cell battery downward until the release latch springs back into place and secures it.
3.
Install the:
a.
drive cage
b.
front bezel
c.
cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat Sink Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover
27