Dell OptiPlex 7020 Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 20
Removing the Memory, Installing the Memory, Removing the System Fan
View all Dell OptiPlex 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Press down on the memory retaining tabs on each side of the memory modules, and lift the memory modules out of the connectors on the system board. Installing the Memory 1. Align the notch on the memory-card with the tab in the system-board connector. 2. Press down on the memory module until the release tabs spring back to secure them in place. 3. Install the cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove a. cover b. optical drive c. drive cage d. front bezel 20
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Press down on the memory retaining tabs on each side of the memory modules, and lift the memory
modules out of the connectors on the system board.
Installing the Memory
1.
Align the notch on the memory-card with the tab in the system-board connector.
2.
Press down on the memory module until the release tabs spring back to secure them in place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove
a.
cover
b.
optical drive
c.
drive cage
d.
front bezel
20