Dell OptiPlex 7020 Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 23
Installing the Power Switch, Removing the Input/Output (I/O) Panel
View all Dell OptiPlex 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing the Power Switch 1. Slide the power switch in through the front of the computer. 2. Connect the power-switch cable to the system board. 3. Install the: a. drive cage b. optical drive c. front bezel d. cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. cover b. optical drive c. drive cage d. front bezel 3. Disconnect the I/O panel or FlyWire cable and the audio cable from the system board. 23
Installing the Power Switch
1.
Slide the power switch in through the front of the computer.
2.
Connect the power-switch cable to the system board.
3.
Install the:
a.
drive cage
b.
optical drive
c.
front bezel
d.
cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
optical drive
c.
drive cage
d.
front bezel
3.
Disconnect the I/O panel or FlyWire cable and the audio cable from the system board.
23