Dell OptiPlex 740 User's Guide - Page 81
Drive, Drives
View all Dell OptiPlex 740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
6 Connect the drive cable to SATA2 or SATA3 on the system board (see "System Board Components" on page 28 for mini tower computers). 1 2 3 1 power cable 2 optical drive cable 3 optical drive connector (SATA) See the documentation that accompanied the drive and controller card to verify that the configuration is correct for your computer. Change any settings necessary for correct configuration. 7 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 8 Install the drive panel to the front of the computer. The drive panel only fits one way (see "Drive-Panel Inserts" on page 70). 9 Replace the computer cover (see "Replacing the Computer Cover" on page 297). 10 Update your configuration information in system setup (see "System Setup" on page 257) by setting the appropriate Drive option (0 or 1) under Drives. 11 Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 327). Mini Tower Computer 81