Dell OptiPlex GL Service Manual - Page 54
Drives in the Drive Cage, Inch Diskette Drive Removal
View all Dell OptiPlex GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Drives in the Drive Cage retaining screw bracket mounting screw (2) hook (2) bracket catch Figure 4-9. 3.5-Inch Diskette Drive Removal To remove a drive from the 3.5-inch diskette drive bay, follow these steps: 1. Disconnect the DC power cable and the interface cable from the back of the drive. 2. Remove the bracket retaining screw. 3. Release the bracket catch from the chassis. Rotate the drive bracket to the right, and lift the bracket from the top of the drive bay. 4. Remove the two mounting screws from each side of the drive and remove the drive from the bracket. To replace a 3.5-inch diskette drive, locate the two hooks on the right side of the bracket that hold the drive in position. Engage those two hooks in the side of the drive. 4-10 Dell OptiPlex GXpro Systems Service Manual