Dell OptiPlex GL Service Manual - Page 61
Expansion Cards, Expansion-Card Cage
View all Dell OptiPlex GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Expansion Cards The system unit has a removable expansion-card cage. The expansion cards fit into connectors on a riser board. Dell recommends that you remove the expansion-card cage first before removing or installing expansion cards. Expansion-Card Cage lever expansioncard cage notch chassis Figure 4-16. Expansion-Card Cage Removal To remove an expansion-card cage, follow these steps: 1. Disconnect any cables from the expansion cards and the riser board. 2. Rotate the lever toward the back of the system unit until it stops in the upright position. 3. Lift the expansion-card cage up and away from the system unit. To replace an expansion-card cage, keep the cage flush against the chassis to insure that the lever engages the notch when the lever is depressed. Removing and Replacing Parts 4-17