Dell Optiplex 9010 All In One Dell OptiPlex 9010 All-In-One Touch Owner's Manu - Page 36
Remove the LVDS cable by pressing the latch inwards and disconnecting it from the connector. Remove any other
View all Dell Optiplex 9010 All In One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
o) processor fan p) speakers q) antenna module r) system board NOTE: The display panel should be disassembled in a clean-room environment. 3. Remove the LVDS cable by pressing the latch inwards and disconnecting it from the connector. Remove any other cables or antennae around the edges of the base panel. 4. Remove the screws that secure the chassis to the middle frame. Lift the chassis off the middle frame. 5. Peel off the tape that adheres the connectors to the display panel. 36
o)
processor fan
p)
speakers
q)
antenna module
r)
system board
NOTE:
The display panel should be disassembled in a clean-room environment.
3.
Remove the LVDS cable by pressing the latch inwards and disconnecting it from the connector. Remove any other
cables or antennae around the edges of the base panel.
4.
Remove the screws that secure the chassis to the middle frame. Lift the chassis off the middle frame.
5.
Peel off the tape that adheres the connectors to the display panel.
36