Dell P2014H DELL Users Guide - Page 12

Setting Up the Monitor Attaching the Stand NOTE: The stand is detached from monitor when it is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Connecting the White DVI Cable Connecting the Blue VGA Cable To attach the monitor stand: 1. Remove the cover and place the monitor on it. 2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor. 3. Press the stand till it snaps into its place. Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable or the black( DisplayPort) to the corresponding video port on the back of your computer. Do not connect both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems. 22  Setting Up the Monitor Connecting the black DisplayPort Cable CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Setting Up the Monitor  23