Dell P2014H DELL Users Guide - Page 7

6 USB downstream Connect your USB device. You can only use port this connector after you have connected the USB cable to the computer and USB upstream connector on the monitor. 7 Stand lock To disable the stand release button and lock the stand assembly using an M3 X 6 mm screw (screw not included). Monitor Specifications Flat Panel Specifications Screen type Panel type Viewable image dimensions Diagonal Horizontal Active Area Vertical Active Area Area Pixel pitch Viewing angle Luminance output Contrast ratio Faceplate coating Backlight Response Time Color depth Color gamut (Typical) Active matrix - TFT LCD In plane switching 49.41 cm (19.5 inches ) 433.92 mm (17.08 inches) 236.34 mm (9.30 inches) 102552.65 mm2 (158.96 inch2) 0.2712 (H) mm x 0.2626 (V) mm 178° (vertical) typ, 178° (horizontal) typical 250 cd/m²(typical) 1000:1 (typical) AG type,Haze 25%, hard-coating 3H LED edgelight system 8ms Typ. g-to-g with OD 16.7 million colors 83%* (CIE1976) *[P2014Ht] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards. Resolution Specifications Horizontal scan range Vertical scan range Maximum resolution 30 kHz to 83 kHz (automatic) 56 Hz to 76 Hz (automatic) 1600 x 900 at 60 Hz 12  About Your Monitor Video Supported Modes Video display capabilities (DVI playback) 480p, 576p, 720p, 1080p and 1080i Preset Display Modes Display Mode 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1600 x 900 Horizontal Frequency (kHz) 31.5 31.5 37.5 37.9 46.9 48.4 60.0 67.5 64.0 80.0 60.0 Vertical Frequency (Hz) 70.0 60.0 75.0 60.0 75.0 60.0 75.0 75.0 60.0 75.0 60.0 Pixel Clock Sync Polarity (MHz) (Horizontal/ Vertical) 28.3 -/+ 25.2 -/­ 31.5 -/­ 40.0 +/+ 49.5 +/+ 65.0 -/­ 78.8 +/+ 108.0 +/+ 108.0 +/+ 135.0 +/+ 97.75 +/­ Electrical Specifications Video input signals • Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance Synchronization input signals AC input voltage/ frequency/current Inrush current • DP 1.2 signal input support Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green) 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5 A (Max.) 120 V:30 A (Max.) 240 V:60 A (Max.) About Your Monitor  13