Dell P2314T Multi with LED Users Guide - Page 37

Common Problems The following table contains information about resolving common monitor problems. Common Symptoms What You Experience No Video (Power light off) No picture Possible Solutions • Make sure the display cable connecting the monitor and the computer is properly connected and secure. • Make sure the power outlet is functioning properly using any other electrical equipment. • Make sure the power button is not pressed-in. • Make sure the correct input source is selected using the Input Source Select button. • Check the Power Button LED option under Energy Settings in OSD Menu. No Video (Power light on) • Increase brightness and contrast using OSD. • Perform monitor self-test. No picture or no brightness • Check for bent or broken pins on the display cable and the ports. • Run the built-in diagnostics. • Make sure the correct input source is selected using the Input Source Select button. Poor Focus Shaky/Jittery Video Missing Pixels Stuck-on Pixels Picture is fuzzy, blurry, or ghosting Wavy picture or fine movement LCD screen has spots • Perform Auto Adjust using OSD. • Adjust the Phase and Pixel Clock using OSD. • Eliminate video extension cables. • Reset the monitor to factory settings. • Change the video resolution to the correct aspect ratio (16:9). • Perform Auto Adjust using OSD. • Adjust the Phase and Pixel Clock using OSD. • Reset the monitor to factory settings. • Check environmental factors. • Relocate the monitor and test in another room. • Turn off the monitor, disconnect and reconnect the power cable, and turn on the monitor. • Pixel that is permanently off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell support site at dell.com/ support/monitors. Troubleshooting 37