Dell P2414H Dell User Guide - Page 12

Electrical Specifications Model Video input signals Synchronization input signals AC input voltage/frequency/ current Inrush current P2214H/P2414H • Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance • Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input impedance • DP 1.2 signal input support* Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green) 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.2 A (typical) • 120 V: 30 A (Max) • 240 V: 60 A (Max) *Support DP1.2 (CORE) specification. Excludes High Bit Rate 2 (HBR2), Fast AUX transaction, Multi-stream transport (MST), 3D stereo transport, HBR Audio (or high data rate audio) Physical Characteristics Model Connector type Signal cable type Dimensions (with stand) Height (extended) Height (compressed) Width P2214H P2414H 15-pin D-subminiature, blue connector; DVI-D, white connector; DP, black connector 15-pin D-subminiature, blue connector; DVI-D, white connector; DP, black connector • Digital: detachable, DVID, solid pins, shipped detached from the monitor • Digital: DisplayPort, 20 pin • Analog: attachable, DSub, 15 pins, shipped attached to the monitor • Digital: detachable, DVID, solid pins, shipped detached from the monitor • Digital: DisplayPort, 20 pin • Analog: attachable, DSub, 15 pins, shipped attached to the monitor 483.6 mm (19.04 inches) 354.2 mm (13.94 inches) 512.7 mm (20.19 inches) 499.0 mm (19.65 inches) 369.0 mm (14.53 inches) 565.6 mm (22.27 inches) 12 | About Your Monitor