Dell PowerConnect 3248 User Manual - Page 21

Switch 5224: Port Security, Switch 5224: Global Configuration, Port Security Configuration - ethernet switch

Get Dell PowerConnect 3248 PDF manuals and user guides View all Dell PowerConnect 3248 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Example Console(config)#interface ethernet 1/5 Console(config-if)#port security action shutdown Console(config-if)#port security Console(config-if)# Switch 5224: Port Security The Ports/Port Security page contains links to the following pages: • Global Configuration • Port Security Configuration Switch 5224: Global Configuration On the Ports/Port Security/Global Configuration page, you can set the security action to be taken when a port intrusion is detected. This setting applies to all ports on the switch. The page provides one parameter to configure: • Shutdown and Trap - Indicates the action to be taken when a port security violation is detected: - None: Indicates that no action should be taken. (This is the default.) - Trap and Shutdown: Indicates that the port should be disabled and an SNMP trap message sent. To save any changes you make in this page, click Apply Changes. If you do not want to save the changes, click Refresh. Addendum to the 3 248 and 52 24 User 's Guides 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
Addendum to the 3248 and 5224 User’s Guides
21
Example
Console(config)#interface ethernet 1/5
Console(config-if)#port security action shutdown
Console(config-if)#port security
Console(config-if)#
Switch 5224: Port Security
The
Ports/Port Security
page contains links to the following pages:
•
Global Configuration
•
Port Security Configuration
Switch 5224: Global Configuration
On the
Ports/Port Security/Global Configuration
page, you can set the
security action to be taken when a port intrusion is detected. This setting
applies to all ports on the switch.
The page provides one parameter to configure:
•
Shutdown and Trap
— Indicates the action to be taken when a port
security violation is detected:
–
None
: Indicates that no action should be taken. (This is the
default.)
–
Trap and Shutdown
: Indicates that the port should be disabled
and an SNMP trap message sent.
To save any changes you make in this page, click
Apply Changes
. If you do
not want to save the changes, click
Refresh
.