Dell PowerConnect 3248 User Manual - Page 5
Flash Level, Ram Level, Apply Changes, Refresh, logged to RAM. - guide
View all Dell PowerConnect 3248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
• Flash Level - Limits log messages saved to the switch's permanent flash memory for all levels up to the specified level. For example, if level 3 is specified, all messages from level 0 to level 3 are logged to flash. • Ram Level - Limits log messages that are saved to the switch's temporary RAM memory for all levels up to the specified level. For example, if level 7 is specified, all messages from level 0 to level 7 are logged to RAM. To save any changes you make in this page, click Apply Changes. If you do not want to save the changes, click Refresh. The following figure is representative of PowerConnect 3248 and 5224. NOTE: The Flash Level must be equal to or less than the Ram Level. NOTE: System log messages are logged every 60 minutes. Addendum to the 3248 and 5224 User's Guides 5