Dell PowerConnect 3424 User's Guide (.htm) - Page 125

Enabling Logs: 1 Open the Global Log Parameters page. 2 Select Enable in the Logging drop-down list. 3 Select the log type and log severity in the Global Log Parameters check boxes. 4 Click Apply Changes. The log settings are saved, and the device is updated. Enabling Logs Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the Global Log Parameters page. Table 6-25. Global Log Parameters CLI Commands CLI Command logging on logging {ip-address | hostname} [port port] [severity level] [facility facility] [description text] logging console level logging buffered level logging file level clear logging clear logging file Description Enables error message logging. Logs messages to a syslog server. For a list of the Severity levels, see "Log Severity Levels" on page 123. Limits messages logged to the console based on severity. Limits syslog messages displayed from an internal buffer (RAM) based on severity. Limits syslog messages sent to the logging file based on severity. Clears logs. Clears messages from the logging file. The following is an example of the CLI commands: console(config)# logging on console(config)# logging console errors console(config)# logging buffered debugging console(config)# logging file alerts console(config)# end console# clear logging file Clear Logging File [y/n]y Configuring System Information 125