Dell PowerConnect 3424 User's Guide (.htm) - Page 240

www.dell.com | support.dell.com The Port Security Table contains the additional following fields: Unit No. - Specifies the stacking unit for which locked port information is displayed. Copy Parameters from - Copies parameters to the selected unit number. Configuring Locked Port Security with CLI Commands The following table summarizes the equivalent CLI commands for configuring Locked Port security as displayed in the Port Security page. Table 7-64. Port Security CLI Commands CLI Command Description shutdown Disables interfaces. set interface active {ethernet Reactivates an interface that is shutdown due to interface | port-channel port- port security reasons. channel-number} port security learning {disabled | dynamic} Defines the locked port type. port security max max-addr Specifies the number of MAC address that can be learned on the port. port security [forward | Locks learning of new addresses on an interface. discard | discard-shutdown] [trap seconds] show ports security {ethernet Displays port lock status. interface | port-channel portchannel-number} The following is an example of the CLI commands: console # show ports security Port ----1/e1 1/e2 Status ------locked locked 1/e3 Unlocked Action ------Discard Discard, Shutdown - Trap ------Enable Disable - Frequency --------100 Counter -------88 - - 240 Configuring Switch Information