Dell PowerConnect 3424 User's Guide (.htm) - Page 156

www.dell.com | support.dell.com The following is an example of the CLI command: Console# show fiber-ports optical-transceiver detailed Port Temp [C] ---1/e1 1/e2 ---48 43 Voltage Current [Volt] -----5.15 5.15 ----50 10 Output Input [mA] [mWatt] -----1.789 1.789 -----1.789 1.789 POWER TX [mWatt] -----No No LOS Fault ----No No Managing Switch Security The Management Security page provides access to security pages that contain fields for setting security parameters for ports, device management methods, user, and server security. To open the Management Security page, click System→Management Security in the tree view. Defining Access Profiles The Access Profiles page contains fields for defining profiles and rules for accessing the device. Access to management functions can be limited to user groups, which are defined by ingress interfaces and source IP address or source IP subnets. Management access can be separately defined for each type of management access method, including Web (HTTP), Secure Web (HTTPS), Telnet, and Secure Telnet. Access to different management methods may differ between user groups. For example, User Group 1 can access the device only via an HTTPS session, while User Group 2 can access the device via both HTTPS and Telnet sessions. Management Access Lists contain up to 256 rules that determine which users can manage the device, and by which methods. Users can also be blocked from accessing the device. The Access Profiles page contains fields for configuring Management Lists and applying them to specific interfaces. To open the Access Profiles page, click System→Management Security→Access Profiles in the tree view. 156 Configuring System Information