Dell PowerConnect 3424 User's Guide (.htm) - Page 68

www.dell.com | support.dell.com NOTE: When creating a user name, the default priority is 1, which allows access but not configuration rights. A priority of 15 must be set to enable access and configuration rights to the device. Although user names can be assigned privilege level 15 without a password, it is recommended to always assign a password. If there is no specified password, privileged users can access the Web interface with any password. NOTE: Passwords can be secured by using password management commands to force aging-out of passwords, or expiration of passwords. For more information, see "Security Management and Password Configuration". Configuring an Initial Terminal Password To configure an initial terminal password, enter the following commands: console(config)# aaa authentication login default line console(config)# aaa authentication enable default line console(config)# line console console(config-line)# login authentication default console(config-line)# enable authentication default console(config-line)# password george • When initially logging on to a device through a terminal session, enter george at the password prompt. • When changing a device's mode to enable, enter george at the password prompt. Configuring an Initial Telnet Password To configure an initial Telnet password, enter the following commands: console(config)# aaa authentication login default line console(config)# aaa authentication enable default line console(config)# line telnet console(config-line)# login authentication default console(config-line)# enable authentication default console(config-line)# password bob • When initially logging onto a device through a Telnet session, enter bob at the password prompt. • When changing a device mode to enable, enter bob. 68 Configuring PowerConnect 3424/P and 3448/P