Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference
Dell PowerConnect Brocade M6505 Manual
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerConnect Brocade M6505 manual content summary:
- Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 1
53-1002750-01 ® 14 December 2012 Fabric OS MIB Reference Supporting Fabric OS v7.1.0 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 2
service offered or to be offered by Brocade. Brocade brocade.com Document History Document Title Brocade MIB Reference Manual v2.3 Brocade MIB Reference Manual v3.0 Brocade MIB Reference Manual v3.0, 4.0 Brocade MIB Reference Manual (v4.1, v4.0.x, v3.1, v3.0.x, v2.6.x) Brocade MIB Reference Manual - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 3
Center Backbone Director. October 2007 Updated to support the Brocade 300, 5100, and 5300 switches. March 2008 Updated to support the November 2008 Brocade DCX-4S and Brocade Encryption Switch. Updated to support the Brocade 7800 Extension Switch, Brocade 8000 Switch, FCOE10-24 DCX Blade - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 4
Publication Number Summary of Changes Publication Date 53-1002151-01 53-1002750-01 Updated to support Brocade 6510, Brocade DCX 8510-8 Backbone, and Brocade DCX 8510-4 Backbone. Added FibreAlliance extension MIB, SNMPv2 MIB, ipAddressTable, MIBs for swConnUnitPortStatExtention Table, and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 5
SNMP CLI usage 11 Access Gateway and Brocade MIBs 19 Firmware upgrades and enabled traps 20 Fabric OS commands for configuring SNMP 20 Support for Administrative Domains 23 Support for Role-Based Access Control 23 Support for IPv6 addressing 23 Support for Virtual Fabric 23 Customized traps - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 6
Chapter 2 Chapter 3 Chapter 4 MIB-II (RFC1213-MIB) MIB II overview 25 MIB-II object hierarchy 25 Textual conventions 32 Objects and types imported 32 System group 32 Interfaces group 34 AT group 38 IP group 38 ICMP group 43 TCP group 45 UDP group 47 EGP group 48 Transmission group 48 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 7
Chapter 5 Chapter 6 Fabric OS MIB Reference 53-1002750-01 fcFeCapabilities group 86 FCFABRIC-ELEMENT-MIB (experimental branch 87 FCFABRIC-ELEMENT-MIB organization 88 Definitions for FCFABRIC-ELEMENT-MIB 91 fcFeConfig group 93 fcFeOp group 96 fcFeError group 99 fcFeAcct group 100 fcFeCap - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 8
197 FCMGMT-MIB system organization of MIB objects 197 Definitions for FCMGMT-MIB 203 Connectivity unit group 204 Statistics group 225 Service group 230 SNMP trap registration group 232 Revision number scalar 233 Unsupported tables 233 FibreAlliance MIB traps 234 FibreAlliance Extension MIB - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 9
Chapter 11 Chapter 12 Chapter 13 Chapter 14 Chapter 15 Chapter 16 Switch connectivity unit port table 241 FCIP MIB Objects FCIP MIB overview 243 FCIP MIB system organization of MIB objects 243 FCIP entity instance table 245 FCIP link table 246 FCIP TCP connection table 247 FCIP extended link - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 10
Chapter 17 Chapter 18 Chapter 19 LLDP MIB 284 LLDP configuration group 284 LLDP statistics group 286 LLDP local system data group 287 LLDP remote systems data group 289 LLDP-EXT-DOT1-MIB 291 LLDP-EXT-DOT1-MIB organization 291 lldpXdot1 configuration group 293 lldpXdot1 local data group 294 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 11
Appendix A Appendix B Index MIB Object Groupings Switch variables 339 Sensor variables 339 Port variables 339 Variables for state and status 339 Variables for statistics and measurement 340 Event variables 340 ISL and end device variables 340 ISL variables 340 End Device variables 340 SNMP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 12
xii Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 13
In this chapter •How this document is organized xiii •Supported hardware and software xiv •What's new in this document The document contains the following components: • Chapter 1, "Understanding Brocade SNMP," provides an introduction to Brocade SNMP and MIBs. • Chapter 2, "MIB-II (RFC1213-MIB)," - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 14
here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for Fabric OS vx.x.x, documenting all possible - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 15
interoperate with switches running Fabric OS v7.0.0, but cannot load Fabric OS v7.0.0: • Brocade 4100 • Brocade 4900 • Brocade 5000 • Brocade 7500/7500E • Brocade 7600 • Brocade 48000 The following blades are not supported in any chassis operating with Fabric OS v7.0.0: Fabric OS MIB Reference xv - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 16
following changes have been made since this document was last released: • Information that was added: - Support for Brocade 6505, Brocade 6520, and Brocade VA-40FC - The following traps included: swDeviceStatusTrap - The following MIB objects included: swConnUnitPortTable swConnUnitPortEntry - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 17
readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In Notes, cautions, and warnings The following notices and statements are used in this manual. They are listed below in order of increasing severity of potential hazards. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 18
Notice to the reader Key terms For definitions specific to Brocade and Fibre Channel, see the technical glossaries on MyBrocade. See "Brocade resources" on page xviii for instructions on accessing MyBrocade. For definitions of SAN-specific terms, visit the Storage Networking Industry Association - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 19
firmware, and software support, including product repairs problem, including the switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting Brocade 300, 4100, 4900, 5100, 5300, 6510, 6520, 7500, 7500E, 7800, 8000, VA-40FC, and Brocade - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 20
an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number and as much detail as possible about your comment, including the topic heading and page number and your - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 21
switch variables (MIBs) remotely as well as to set up an enterprise-level management process. Every Brocade switch and director supports SNMP. Recipients for SNMP traps are restricted according to security levels. Security levels are selected and set for a switch using the snmpconfig --set seclevel - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 22
Sent. Sent. Sent for all SNMPv3 users except noAuthNoPriv users. Not Sent. Sent only for authPriv users. Not Sent. Understanding SNMP basics Every Brocade switch carries an agent and management information base (MIB), as shown in Figure 1. The agent accesses information about a device and makes it - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 23
the sequence of numeric labels on the nodes along a path from the root to the object. For example, as shown in Figure 4, the Brocade SW.MIB OID is: 1.3.6.1.4.1.1588.2.1.1.1 The corresponding name is: iso.org.dod.internet.private.enterprise.bcsi.commDev.fibreChannel.fcSwitch.sw The other branches are - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 24
to follow the standards. The standards are as follows: • FibreAlliance (FA) MIB: Brocade supports v4.4. and later releases. • Fabric Element (FE) MIB: accepted by the Internet Engineering Task Force (IETF). Brocade supports FE_RFC2837.mib under the MIB-II branch in Fabric OS v7.1.0, v7.0.0, v6 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 25
Reference. HA traps Consider enabling these traps to monitor field-replaceable unit (FRU) status and control processor (CP) status when you have a Brocade director in your environment: • fruStatusChanged This trap is generated by a FRU status change, such as a switch reboot or disabling or enabling - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 26
1 Understanding SNMP basics SW traps There are fourteen specific traps defined in Brocade SW-TRAP. 1. swfault (no longer supported) 2. swSensorScn (no longer supported) 3. swFCPortScn This trap is generated by a port state change. 4. swEventTrap This trap is generated by any switch event reported to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 27
These standard MIBs are defined in RFC publications. To find specific MIB information, examine the Brocade proprietary MIB structure and the standard RFC MIBs supported by Brocade. Brocade MIB files The Brocade MIB files are as follows: • bd.mib • BRCD_REG.mib • BRCD_TC.mib • brcdfcip.mib • CPQ_HOST - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 28
-DOT3-MIB • IP MIB • SNMP-COMMUNITY-MIB Before loading MIBs Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (Table 3). TABLE 3 Firmware Fabric OS-supported SNMP versions SNMPv1 SNMPv2 SNMPv3 Fabric OS v5.x Yes Yes1 Yes2 Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 29
. 2. Fabric OS v5.x supports the SNMPv3-USM MIB (snmpUsmMIB), which is available as RFC 3414. MIB loading order Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade MIBs, refer to Figure - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 30
MIB P-BRIDEGE MIB Q-BRIDEGE MIB INET-Address - MIB BRCDFCIP.mib IEEE 802.1 PAE MIB RSTP-MIB Legend Standard MIB File Dependency Module name Brocade MIB Module name FOS supported FIGURE 5 Brocade SNMP MIB dependencies and advised installation order 10 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 31
Loading Brocade MIBs 1 NOTE FA.mib obsoletes the use of the connUnitPortStatFabricTable and now uses the connUnitPortStatTable for port statistics. All versions of Fabric OS support SNMPv1. Fabric OS v5.0.1 supports the SNMPv3-USM (snmpUsmMIB) MIB. Fabric OS v5.3.0 supports the FCIP MIB and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 32
1 Loading Brocade MIBs Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser1] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]): (2..2) [2] Engine ID: [0:0:0:0:0:0:0:0:0] User (ro): [snmpuser2] Auth - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 33
Loading Brocade MIBs 1 Priv Protocol: noPriv Engine ID: 00:00:00:00:00:00:00:00: configuration(snmp user not configured in FOS user database will have physical AD and admin role as the default): User (rw): [snmpadmin1] Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] Priv Protocol [DES(1)/noPriv - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 34
Port: 162 Trap User: snmpadmin2 Trap recipient Severity level: 2 Trap Entry 3: HCL0389U.corp.brocade.com Trap Port: 162 Trap User: snmpadmin3 Trap recipient Severity level: 5 Trap Entry yet To display the traps and MIBs supported in Fabric OS: 14 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 35
Loading Brocade MIBs 1 switch:root> snmpTraps --show # |Mib Name |Supported Traps 001|SW-MIB |sw-track-changes-trap | |sw-fabric-watch-trap | |sw-fc-port-scn | |ip-v6-change-trap | |sw-pmgr-event-trap | |sw- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 36
1 Loading Brocade MIBs switch:admin> snmptraps -unblock -port 1/10 To block port traps on slot 1 and port 10: Switch:admin> snmptraps -block -port 1/10 Example of accessControl - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 37
Loading Brocade MIBs 1 Operation succeeded switch:admin> snmpconfig --show mibCapability [...] SW-MIB: YES swFault: NO swSensorScn: NO swFCPortScn: NO swEventTrap: YES DesiredSeverity:None swFabricWatchTrap: YES DesiredSeverity:None - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 38
1 Loading Brocade MIBs swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: YES the agent's system group configuration back to factory default ***** sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support authTraps = 0 (OFF) ***** Are you sure - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 39
default: DCX_128:FID128:admin> snmpconfig --default password and set the trap port as 162. (Same values are set as in the switch SNMPv3 configuration.) NOTE SNMPv3 supports AES128 and DES protocols. SNMPv3 does not support privacy protocols AES192, AES256, and 3DES. Access Gateway and Brocade - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 40
conventions are specific to fabric switches. Supported on embedded switches only. Disabled in upgrade to the Fabric OS v4.4 firmware or later, by default the individual traps are turned off even if the corresponding SNMP on the Brocade switches, refer to the Fabric OS Administrator's Guide. TABLE 5 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 41
and password, the privacy protocol and password, the SNMPv3 trap recipient's IP address, its associated user index and trap severity level. When "0" is configured as a trap port, traps can be received at the default port 162. In Fabric OS v6.3.0 and later, the --set snmpv3 command supports an - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 42
mibCapability Configures MIBs interactively. When used without a MIB name, this command displays a menu with supported MIBs and associated traps, and for each MIB or trap, you are prompted to confirm or change the default by specifying yes or no. Specifying yes means you can access the MIB variables - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 43
administrator access within a fabric, and to provide service providers with a means to assign portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD may also limit access to a configured set of users. Support for Role-Based Access Control Role-Based - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 44
is only applicable for OEM customers. FOS v7.0.0 and v7.0.1 releases supported addition of system OID in trap OID to customized trap OID on .2.1.1.62.0.5 on DCX and 1.3.6.1.4.1.1588.2.1.1.71.0.5 on Brocade 5100. This feature is not supported from FOS 7.1.0 release. 24 Fabric OS MIB Reference 53- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 45
MIB variables in this chapter come directly from the MIB-II itself. The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. MIB-II object hierarchy Figure 6 through Figure 16 depict the organization and structure of MIB-II. Fabric OS MIB Reference - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 46
2 MIB II overview - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - rmon - iFMIB FIGURE 6 MIB-II overall hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 47
MIB II overview 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 48
2 MIB II overview - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 49
MIB II overview 2 FIGURE 10 - ipAddressType 1.3.6.1.2.1.4.34.1.4 - ipAddressPrefix 1.3.6.1.2.1.4.34.1.5 - ipAddressOrigin 1.3.6.1.2.1.4.34.1.6 - ipAddressStatus 1.3.6.1.2.1.4.34.1.7 - ipAddressCreated 1.3.6.1.2.1.4.34.1.8 - ipAddressLastChanged 1.3.6.1.2.1.4.34.1.9 - ipAddressRowStatus - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 50
2 MIB II overview - tcp (1.3.6.1.2.1.6) - tcpRtoAlgorithm 1.3.6.1.2.1.6.1 - tcpRtoMin 1.3.6.1.2.1.6.2 - tcpRtoMax 1.3.6.1.2.1.6.3 - tcpMaxConn 1.3.6.1.2.1.6.4 - tcpActiveOpens 1.3.6.1.2.1.6.5 - tcpPassiveOpens 1.3.6.1.2.1.6.6 - tcpAttemptFails 1.3.6.1.2.1.6.7 - tcpEstabResets 1.3.6.1.2.1.6.8 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 51
11.3 - snmpInBadCommunityNames 1.3.6.1.2.1.11.4 - snmpInBadCommunityUses 1.3.6.1.2.1.11.5 - 1.3.6.1.2.1.11.7 and 1.3.6.1.2.1.11.23 is not supported. - snmpInTooBigs 1.3.6.1.2.1.11.8 - snmpInNoSuchNames 1.3.6.1.2.1.11.9 - snmpInBadValues 1.3.6.1.2.1.11.10 - snmpInReadOnlys 1.3.6.1.2.1.11.11 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 52
2 System group - ifMIB (1.3.6.1.2.1.31) - ifXTable 1.3.6.1.2.1.31.1.1 - ifXentry 1.3.6.1.2.1.31.1.1.1 - ifName 1.3.6.1.2.1.31.1.1.1.1 - ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 - ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 - ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 - ifOutBroadcastPkts 1.3.6.1.2.1.31 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 53
default value is either: • Fibre Channel Switches: iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcS witch.sw • Brocade minimum length of the string must be of four characters. The default is Field Support. Set this value using the snmpconfig command. An administratively assigned - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 54
default is End User Premise. Set this value using the snmpconfig command. A value that indicates the set of services . FCIP tunnel support is added in Fabric OS 5.3.0 and later. To support FCIP tunneling, entries The return value is dynamic for all Brocade switches and depends on the number of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 55
from 1207959552 A textual string containing information about the interface. The ifDescr for non-bladed switches includes: lo, eth0, and fc0. The ifDescr for Brocade 12000, 24000, and 48000 directors includes: lo, eth0, fc0, and sit0, as well as fc1, eth0:1, and eth0:2. Valid values: • For WAN - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 56
2 Interfaces group TABLE 9 Object and OID Access Description ifSpeed 1.3.6.1.2.1.2.2.1.5 Read only An estimate (in bits per second) of the interface's current bandwidth. For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation can be made, this object should - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 57
outbound packets that could not be transmitted because of errors. The length of the output packet queue (in packets). NOTE: This object is not supported. A reference to MIB definitions specific to the particular media being used to realize the interface. If the interface is realized by an Ethernet - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 58
by, but not addressed to, this entity. IP gateways forward datagrams; IP hosts do not (except those source-routed through the host). Read-write The default value inserted into the time-to-live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 59
in ipForwDatagrams. The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which any datagrams that a host cannot route because all of its default gateways are down. The maximum number of seconds that received fragments - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 60
datagrams received on this interface. NOTE: This object is not supported. ipRouteTable 1.3.6.1.2.1.4.21 Not The IP routing table contains an entry of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 61
mechanism by which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. ipRouteAge 1.3.6.1.2.1.4.21.1.10 Read-write The number of seconds since this route was last updated or otherwise determined to be - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 62
the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by class-B class-C NOTE: If the value of the ipRouteDest is 0.0.0.0 (default route), then the mask value is also 0.0.0.0. All IP routing subsystems - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 63
ICMP group 2 TABLE 11 Object and OID Access Description ipAddressTable 1.3.6.1.2.1.4.34 Not This table contains IPv4 and IPv6 addressing information relevant to the accessible entity's interfaces. ipAddressEntry 1.3.6.1.2.1.4.34.1 Not An address mapping for a particular interface. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 64
attempted to send. NOTE: This counter includes all those counted by icmpOutErrors. The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value must not include errors discovered outside the ICMP layer such as the inability of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 65
this type has the semantics of the UBOUND quantity described in RFC 793. The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. The number of times TCP connections have made - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 66
2 TCP group TABLE 13 Object and OID tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 tcpConnEntry - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 67
UDP group 2 TABLE 13 Object and OID tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 tcpInErrs 1.3.6.1.2.1.6.14 tcpOutRsts 1.3.6.1.2.1.6.15 Access Read-write - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 68
for any IP interface associated with the node, the value 0.0.0.0 is used. Read only The local port number for this UDP listener. EGP group Brocade does not support the EGP group. This section is not applicable. For complete information regarding the EGP group, refer to RFC 1213. Transmission group - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 69
only Description The total number of messages delivered to the SNMP entity from the transport service. The total number of SNMP messages that were passed from the SNMP protocol entity to the transport service. The total number of SNMP messages that were delivered to the SNMP protocol entity and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 70
2 SNMP group TABLE 15 Object and OID snmpOutTooBigs 1.3.6.1.2.1.11.20 Access Read only snmpOutNoSuchNames Read only 1.3.6.1.2.1.11.21 snmpOutBadValues 1.3.6.1.2.1.11.22 Read only snmpOutGenErrs 1.3.6.1.2.1.11.24 Read only snmpOutGetRequests 1.3.6.1.2.1.11.25 Read only snmpOutGetNexts - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 71
at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. NOTE: This object is not supported. The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 72
at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. NOTE: This object is not supported. The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 73
, and at other times as indicated by the value of ifCounterDiscontinuityTime. NOTE: This object is not supported. Indicates whether linkUp or linkDown traps should be generated for this interface. By default, this object should have the value enabled (1) for interfaces which do not operate on any - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 74
the length of new values depending on how much storage is already occupied by the current values for other interfaces. NOTE: This object is not supported. The value of sysUpTime on the most recent occasion at which any one or more of this interfaces counters suffered a discontinuity. The relevant - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 75
entity recognizes a failure in one of the communication links represented in the agent's configuration. This trap is generated for the following ports: • FCIP GE ports [Brocade 7800E/Brocade 7500/FR4-18i router blade/FX8-24 DCX Extension Blade] • ISCSI GE ports [FC4-16IP] • FCOE 10G ports - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 76
2 Generic traps 56 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 77
the MIB variables in this chapter come directly from the MIB-II itself. The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. RMON MIB object hierarchy Figure 17 through Figure 22 depict the organization and structure of RMON MIB. - iso - org - dod - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 78
3 RMON MIB overview - statistics 1.3.6.1.2.1.16.1 - etherStatsTable 1.3.6.1.2.1.16.1.1 - etherStatsEntry 1.3.6.1.2.1.16.1.1.1 - etherStatsIndex 1.3.6.1.2.1.16.1.1.1.1 - etherStatsDataSource 1.3.6.1.2.1.16.1.1.1.2 - etherStatsDropEvents 1.3.6.1.2.1.16.1.1.1.3 - etherStatsOctets 1.3.6.1.2.1.16.1.1.1.4 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 79
RMON MIB overview 3 - alarm 1.3.6.1.2.1.16.3 - alarmTable 1.3.6.1.2.1.16.3.1 - alarmEntry 1.3.6.1.2.1.16.3.1.1 - alarmIndex 1.3.6.1.2.1.16.3.1.1.1 - alarmInterval 1.3.6.1.2.1.16.3.1.1.2 - alarmVariable 1.3.6.1.2.1.16.3.1.1.3 - alarmSampleType 1.3.6.1.2.1.16.3.1.1.4 - alarmValue 1.3.6.1.2.1.16 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 80
that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices. The groups supported under this are statistics, history, alarm, and event. Statistics group TABLE 19 Object and OID statistics 1.3.6.1.2.1.16.1 etherStatsTable 1.3.6.1.2.1.16 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 81
Statistics group 3 TABLE 19 Object and OID Access etherStatsBroadcastPkts Read only 1.3.6.1.2.1.16.1.1.1.6 etherStatsMulticastPkts Read only 1.3.6.1.2.1.16.1.1.1.7 etherStatsCRCAlignErrors Read only 1.3.6.1.2.1.16.1.1.1.8 etherStatsUndersizePkts Read only 1.3.6.1.2.1.16.1.1.1.9 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 82
part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). The default value is 1800. 62 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 83
History group 3 TABLE 20 Object and OID historyControlOwner 1.3.6.1.2.1.16.2.1.1.6 historyControlStatus 1.3.6.1.2.1.16.2.1.1.7 Access Read-write Read-write Description The entity that configured this entry and is therefore using the resources assigned to it. The status of this historyControl - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 84
3 Alarm group TABLE 21 Object and OID Access etherHistoryUndersizePkt Read only s 1.3.6.1.2.1.16.2.2.1.10 etherHistoryOversizePkts Read only 1.3.6.1.2.1.16.2.2.1.11 etherHistoryFragments Read only 1.3.6.1.2.1.16.2.2.1.12 etherHistoryJabbers Read only 1.3.6.1.2.1.16.2.2.1.13 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 85
Event group 3 TABLE 22 Object and OID alarmSampleType 1.3.6.1.2.1.16.3.1.1.4 alarmValue 1.3.6.1.2.1.16.3.1.1.5 alarmStartupAlarm 1.3.6.1.2.1.16.3.1.1.6 alarmRisingThreshold 1.3.6.1.2.1.16.3.1.1.7 alarmFallingThreshold 1.3.6.1.2.1.16.3.1.1.8 alarmRisingEventIndex 1.3.6.1.2.1.16.3.1.1.9 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 86
3 Event group TABLE 23 Object and OID eventEntry 1.3.6.1.2.1.16.9.1.1 eventIndex 1.3.6.1.2.1.16.9.1.1.1 eventDescription 1.3.6.1.2.1.16.9.1.1.2 eventType 1.3.6.1.2.1.16.9.1.1.3 eventCommunity 1.3.6.1.2.1.16.9.1.1.4 eventLastTimeSent 1.3.6.1.2.1.16.9.1.1.5 eventOwner 1.3.6.1.2.1.16.9.1.1.6 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 87
RMON Traps 3 RMON Traps TABLE 24 Trap name and OID rmonEventsV2 1.3.6.1.2.1.16.0 risingAlarm 1.3.6.1.2.1.16.0.1 fallingAlarm 1.3.6.1.2.1.16.0.2 Variables Description Definition point for RMON notifications. "alarmIndex" "alarmVariable" "alarmSampleType" "alarmValue" "alarmRisingThreshold" The - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 88
3 RMON Traps 68 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 89
ELEMENT-MIB (experimental branch 87 •fcFeConfig group 93 •fcFeOp group 96 •fcFeError group 99 •fcFeAcct group 100 •fcFeCap group 101 FE MIB overview Brocade supports two versions of the FE MIB: • FIBRE-CHANNEL-FE-MIB (RFC2837) in the MIB-II branch. • FCFABRIC-ELEMENT-MIB in the experimental - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 90
from the FIBRE-CHANNEL-FE-MIB itself. The notes that follows the descriptions typically pertain to Brocade-specific information and are provided by Brocade. NOTE Brocade does not support the settable "Write" function for any of the Fibre Channel FE MIB objects except fcFxPortPhysAdminStatus. The - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 91
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 FIBRE-CHANNEL-FE-MIB organization Figure 23 through Figure 28 depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso - org - dod - internet - mgmt - mib-2 - fcFeMIB - fcFeMIBObjects - fcFeConfig - fcFeStatus - fcFeError - fcFeAccounting - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 92
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 - fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 - fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 - fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 93
FIBRE-CHANNEL-FE-MIB (MIB-II branch) 4 - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 94
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 95
-to-buffer credit of an Nx_Port or Fx_Port. Version of FC-PH supported by an Nx_Port or Fx_Port. Indicates the Class 1 Stacked Connect Mode supported by an Nx_Port or Fx_Port. 1 (none) 2 (transparent) 3 (lockedDown) Class of service capability of an Nx_Port or Fx_Port. bit 0 (Class F) bit 1 (Class - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 96
4 FIBRE-CHANNEL-FE-MIB (MIB-II branch) TABLE 26 FIBRE-CHANNEL-FE-MIB definitions (Continued) Type definition Value Fc0BaudRate Integer according to FC-0 baud rates Fc0BaudRateCap Integer from 0 to 127 Fc0MediaCap Integer from 0 to 65535 Fc0Medium Integer Fc0TxType Fc0Distance - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 97
Brocade 8000, this value is 32. fcFeConfig group This group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports. The group represents a set of parameters associated with the fabric element or an Fx_Port to support - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 98
of the switch. Read only The maximum number of modules in the fabric element, regardless of their current state. The valid value for all Brocade switches is 1. Not accessible A table that contains information about the modules, one entry for each module in the fabric element. Not accessible An - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 99
Brocade 4100 • Brocade 4900 • Brocade 5000 • Brocade 5100 • Brocade 5300 • Brocade 7500 or 7500E • Brocade 7600 • Brocade 7800 Extension Switch • Brocade 8000 • Brocade Encryption Switch • Brocade DCX • Brocade DCX-4S • Brocade 48000 • Brocade 6505 • Brocade 6510 • Brocade 6520 • Brocade to support. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 100
as the time-out value for detecting an error condition. A value indicating the set of Classes of Service supported by the Fx_Port. A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. Valid values: • 1 - true • 2- false A value indicating the mode of Stacked Connect - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 101
port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. NOTE: This object is not supported on the FC10-6 port blade. The current operational mode of the Fx_Port. Valid values: • unknown (1) • fPort (2) • flPort (3) The desired operational mode of the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 102
. The value is a number of bytes in the range 128 to 2112, inclusive. Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request. A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 103
11 fcFxPortBbCreditModel Read only 1.3.6.1.2.1.75.1.2.3.1.12 Description A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Valid values: • yes (1) - The Fx_Port has agreed to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 104
Sequence errors received by this Fx_Port. The number of Offline Sequence issued by this Fx_Port. fcFeAccounting group The Accounting group is supported only in Fabric OS v4.x. The Accounting group consists of the following tables: • Class 1 accounting table • Class 2 accounting table • Class - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 105
fcFeAccounting group 4 TABLE 30 Object and OID Access Description fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 Read only The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port. fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 Read - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 106
in a frame that the 1.3.6.1.2.1.75.1.5.1.1.6 Fx_Port is capable of receiving from its attached Nx_Port. fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 Read only A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. 86 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 107
supporting Class 1 service. A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. A flag indicating whether the Fx_Port is capable of supporting •fcFeAcct group 100 •fcFeCap group 101 NOTE Brocade does not support the settable "Write" function for any of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 108
4 FCFABRIC-ELEMENT-MIB (experimental branch) • Capability FCFABRIC-ELEMENT-MIB organization Figures 29 through 34 depict the organization and structure of FCFABRIC-ELEMENT-MIB. - iso - org - dod - internet - experimental - fibreChannel - fcFabric - fcFe - fcFeConfig - fcFabricName - fcElementName - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 109
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 110
4 FCFABRIC-ELEMENT-MIB (experimental branch) - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 111
FCFABRIC-ELEMENT-MIB (experimental branch) 4 - fcFeAcct (-- Not Supported --) FIGURE 33 fcFeAcct hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 112
unique within the address space of a fabric. Receive Data_Field size. Buffer-to-buffer credit. Represents the version of FC-PH supported by an Nx_Port or Fx_Port. 1 (none) 2 (transparent) 3 (lockedDown) bit 0 (Class F) bit 1 (Class 1) bit 2 (Class 2) bit 3 (Class 3) bit 4 (Class 4) bit 5 (Class - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 113
(unknown) 2 (fPort) 3 (flPort) 1 (regular) 2 (alternate) fcFeConfig group This group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports. The group represents a set of parameters associated with the fabric element or an - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 114
number of modules in the fabric element, regardless of their current state. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always one for all the supported switches. A table that contains, one entry for each module in the fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 115
Value is used as the time-out value for detecting an error condition. A value indicating the set of Classes of Service supported by the Fx_Port. Valid values: • Class F (0) • Class 1 (1) • Class 2 (2) • Class 3 (3) • Class 4 (4) • Class 5 (5) • Class 6 (6) A flag indicating whether the Fx_Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 116
if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. The FC-0 baud rate of the Fx_Port. The Brocade 12000, 24000, 48000, and DCX directors do not support this MIB variable. The FC-0 medium of the Fx_Port. The FC-0 transmitter type of the Fx_Port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 117
fcFeOp group 4 TABLE 34 Object and OID Access Description fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 Read only The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Ports during fabric login. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 118
a number of bytes in the range 128 to 2112, inclusive. fcFxPortCosSuppAgreed Read only Indicates that the attached Nx_Port has requested the Fx_Port for the 1.3.6.1.3.42.2.1.2.4.1.7 support of classes of services and the Fx_Port has granted the request. 98 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 119
has been agreed. Valid values: • yes (1) • no (2) A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Valid values: • yes (1) • no (2) The port name of the attached Nx_Port, if - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 120
the attached Nx_Port. The number of Offline Sequence errors received by this Fx_Port. The number of Offline Sequence errors issued by this Fx_Port. fcFeAcct group Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable. 100 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 121
is capable of receiving from its attached Nx_Port. A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 122
. This variable has been deprecated and might be implemented for backward compatibility. A value indicating the set of media that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility. 102 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 123
MIB is supported only in Fabric OS v5.x, v6.0, v6.1, v6.1.2_CEE, v6.2.0, v6.3.0, v6.4.0, v6.4.1_fcoe, v7.0.0, and v7.1.0. The descriptions of each of the MIB variables in this chapter come directly from Entity MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 124
5 Entity MIB overview - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 35 Overall tree structure for Entity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 125
Entity MIB overview 5 - entityMapping - entLPMappingTable 1.3.6.1.2.1.47.1.3.1 - entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 - entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 - entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 - entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 - entAliasLogicalIndexOrZero - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 126
Possible values for PhysicalClass Description other (1) unknown (2) chassis (3) The physical entity class is known but does not match any of the supported values. The physical entity class is unknown to the agent. The physical entity class is an overall container for networking equipment. Any - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 127
SnmpEngineIdOrNone contains a zero-length string, then no appropriate SnmpEngineID is associated with the logical entity (that is, SNMPv3 not supported). • For the Brocade 3016 or Brocade 4020 blades, the snmpEngineID takes the UUID value. For example, if the UUID value is A9914D56-1E5A-0E59-C51E - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 128
always contains at least one row for an "overall" physical entity. This object is implemented for Fabric OS v6.4.0. The "overall" physical entry for Brocade is the chassis, and in Fabric OS v6.4.0 and later, it is marked as a FRU. Information about a particular physical entity. Each entry provides - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 129
for this physical entity, then the value other (1) is returned. If the value is unknown by this agent, then the value unknown (2) is returned. Brocade 300 switches can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one blade - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 130
, two power supplies, three fans) • Module: One entry for switch blade, up to two entries for power supplies, and up to three entries for fans Brocade 8000 switch can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one switch - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 131
two power supplies, two fans) • Module: One entry for switch blade, up to two entries for power supplies, and up to two entries for fans Brocade 6505 switch can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one switch blade - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 132
5 Physical entity group TABLE 39 Object and OID Access entPhysicalParentRelPos Read only 1.3.6.1.2.1.47.1.1.1.1.6 entPhysicalParentRelPos Read only 1.3.6.1.2.1.47.1.1.1.1.6 (continued) entPhysicalName Read only 1.3.6.1.2.1.47.1.1.1.1.7 Description An indication of the relative position of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 133
Physical entity group 5 TABLE 39 Object and OID Access entPhysicalHardwareRev Read only 1.3.6.1.2.1.47.1.1.1.1.8 entPhysicalFirmwareRev Read only 1.3.6.1.2.1.47.1.1.1.1.9 entPhysicalSoftwareRev Read only 1.3.6.1.2.1.47.1.1.1.1.10 Description The vendor-specific hardware revision string for the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 134
in a change of the physical entity's entPhysicalIndex value. Set to serial number and part number (if available), respectively. NOTE: For the Brocade 4024 blade, entPhysicalSerialNum displays the vendor-specific serial number; for other switches it displays the factory serial number. The name of the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 135
However, the agent might set the value to a locally unique default value instead of a zero-length string. If write access is type entries. TABLE 40 Platform entPhysicalTable entries for Brocade switches Blades Fans Brocade 200E 1 3 fans not a FRU Brocade 3016 1 NA Power supply 1 PS not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 136
fans 2 PS not a FRU not a FRU Brocade 3900 1 6 fans in 3 FRUs 2 PS Brocade 4012 Brocade 4100 NA NA NA 1 3 FRUs 2 PS Brocade 4900 1 3 FRUs 2 PS Brocade 5000 1 3 FRUs 2 PS Brocade 7500 1 3 FRUs 2 PS Brocade 7600 1 3 FRUs 2 PS Brocade 12000 / 24000 10 blades 3 fans 4 PS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 137
entPhysicalTable entries for Brocade switches (Continued) Blades Fans Power supply Brocade 7800 Extension 1 Switch Brocade VA-40FC 1 supported. Entity mapping group This group is not supported. General group This group is not supported. Entity MIB trap Entity MIB trap is not supported - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 138
. Note that the entAliasMappingTable may be useful for all agents, however implementation of the entityLogicalGroup or entityLogical2Group is required to support this table. • Type: Object Object: entPhysicalSerialNum Min access: not-accessible Description: Read and write access is not required for - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 139
Entity MIB conformance information 5 TABLE 41 object and OID entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 Access Not accessible entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 Not accessible entityMappingGroup 1.3.6.1.2.1.47.3.2.3 Not accessible entityGeneralGroup 1.3.6.1.2.1.47.3.2.4 Not accessible - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 140
5 Entity MIB conformance information TABLE 41 object and OID entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 Access Not accessible Not accessible Description The collection of objects used to represent physical system components, for which a single agent - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 141
Entity MIB conformance information 5 Fabric OS MIB Reference 121 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 142
5 Entity MIB conformance information 122 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 143
the MIB variables in this chapter come directly from the FC Switch MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. NOTE The port swap feature does not have any effect on SNMP for SW MIB. SW-MIB system organization of MIB objects - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 144
6 SW-MIB overview - iso - org - dod - internet - private - enterprises - bcsi - commDev - fibreChannel - fcSwitch - sw - swTrapsV2 - swSystem - swFabric - swModule - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - swTopTalker - swCpuorMemoryUsage - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 145
SW-MIB overview 6 - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 146
6 SW-MIB overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.9.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.1 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 147
SW-MIB overview 6 - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 148
6 SW-MIB overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 149
SW-MIB overview 6 - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 150
6 SW-MIB overview - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 151
SW-MIB overview 6 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 152
conventions Type definition Value Description FcWwn SwDomainIndex SwNbIndex SwSensorIndex SwPortIndex SwTrunkMaster Octet String of size 8 The World Wide Name (WWN) of Brocade-specific products and ports. Integer of size 1 to 239 Fibre Channel domain ID of the switch. Integer of size 1 to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 153
28 swFwMailAlertPlRn 29 swFwMailAlertElPlRn 30 swFwMailAlertStPlRn 55 swFwMailAlertElStPlPf 63 swFwMailAlertElStPlRnPf Threshold or Action levels: 1 swFwReserved (Not supported) 2 swFwDefault 3 swFwCustom Commands: • portthconfig To set port thresholds • thconfig To set other thresholds • sysmonitor - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 154
27 swFwEPortSignal 28 swFwEPortPe 29 swFwEPortWords 30 swFwEPortCrcs 31 swFwEPortRXPerf 32 swFwEPortTXPerf 33 swFwEPortState 84 swFwEPortUtil (not supported) 87 swFwEPortLr 91 swFwEPortC3Discard 97 swFwEPortTrunkUtil 94 swFwVEPortStateChange 95 swFwVEPortUtil 96 swFwVEPortPktLoss Resource class: 83 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 155
EportUtil and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade. In the index swFwEnvTemp, Env refers to Environment class and - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 156
6 sw traps TABLE 43 SW-MIB traps Trap name Commands to configure "swFault" on page 137 N.A. (not supported) "swSensorScn" on page 137 N.A. "swFCPortScn" on page 137 "swEventTrap" on page 138 Always on For more information, refer to the snmpConfig command in the Fabric - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 157
TABLE 44 Trap name and OID Variables swFault swDiagResult 1.3.6.1.4.1.1588.2.1.1.1 swSsn .0.1 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1 .0.2 swSensorStatus swSensorIndex swSensorType swSensorValue swSensorInfo swSsn swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1 .0.3 swFCPortOpStatus swFCPortIndex - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 158
level is %d and SSN is #%s #ARGUMENTS 2, 0, 1, 6, 4, 5, 7, 3, 8, 9 #SEVERITY Warning #TIMEINDEX 1 #STATE Operational For information on setting thresholds in Fabric Watch, refer to the Fabric Watch Administrator's Guide. 138 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 159
TABLE 44 Trap name and OID Variables swTrackChangesTrap swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1 swSsn .0.6 swVfId swIPv6ChangeTrap swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1 swIPv6Status .0.7 swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1 .0.8 swPmgrEventType swPmgrEventTime swPmgrEventDescr - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 160
enabled. This is an internal trap. This trap is sent when the switch changes it state to online or offline. This trap is disabled by default. This trap is sent when the ports are moved from one switch to another. This trap is disabled by - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 161
Switch system group 6 Switch system group TABLE 45 Object and OID swSystem 1.3.6.1.4.1.1588.2.1.1.1.1 swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 Access Description Not The OID sub-tree for switch system group. accessible Read only The current date and time. The return string displays using - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 162
6 Switch system group TABLE 45 Object and OID swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 Access Description Read only The date and time when the firmware was last downloaded or the configuration file was last changed. The return string displays using the following format: ddd MMM DD hh:mm: - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 163
two states can be set: faulty and reboot/fastboot For the Brocade 3250, 3850, 3900, 8000, 24000, 48000 and DCX director the testing (3) and SNMP. This OID is supported in Fabric OS v2.x through v3.x. This OID is not supported in Fabric OS v4.0 through v4.2. This OID is supported in Fabric OS v4.3 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 164
) for Fabric OS v4.4 and later. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and later versions. swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 Read-write The password to be used for FTP transfer of files in the download or upload operation. This OID cannot be - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 165
, this variable is assigned the value -1. swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 Not accessible Table of sensor entries. Table 46 lists the sensors on the Brocade switches. The sensors on the switches vary based on the blades. For the exact count of temperature sensors, refer to Table 47 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 166
#1 Power Supply #1 Return values for the Brocade 12000, 24000, and 48000 directors depend upon only. If there are no events to track, the default return value is "No event so far." If there 128. 1.3.6.1.4.1.1588.2.1.1.1.1.24 swEtherIPAddress Read only Supported in Fabric OS v6.2.0 and later - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 167
the various Brocade switches Temp Fans Brocade 200E Brocade 300 Brocade 3014 Brocade 3016 Brocade 3250 Brocade 3850 Brocade 3900 Brocade 4012 Brocade 4016 Brocade 4018 Brocade 4020 Brocade 4024 Brocade 4100 Brocade 4424 Brocade 4900 Brocade 5000 Brocade 5100 Brocade 5300 Brocade 5410 2 sensors - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 168
Temp Fans Power supply Brocade 5424 3 sensors NA NA Brocade 5450 2 sensors NA NA Brocade 5460 2 sensors NA NA Brocade 5470 2 sensors NA NA Brocade 5480 2 sensors NA NA Brocade 5481 2 sensors NA NA Brocade 7500 3 sensors 3 fans 2 PS Brocade 7600 3 sensors 3 fans 2 PS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 169
ISL to another switch. This value is the same as the physical port number of the local switch +1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. swNbRemDomain Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.3 This is the Fibre Channel - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 170
physical port number of the remote switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. on the member switches of a fabric. 1.3.6.1.4.1.1588.2.1.1.1 accessible Supported in Fabric OS v2.6.1 and not v3.2.0. .2.10 This is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 171
entry. The return value for this entry is 1 through 6. This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • 1 (Secret Code) • 2 (OrigEquipMfr) • 3 (private) • 4 (public) • 5 (common - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 172
, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP switch. A Fibre Channel port is one which supports the Fibre Channel protocol, such as F_Port, containing the configuration and service parameters of the 1.3.6.1.4.1.1588 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 173
for the switch port. Possible values are: • stitch (1) • flannel (2) • loom (3) (Brocade 2000 series) • bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000, 24000) • rdbloom (5) • wormhole (6) • other (7) (Valid value for Brocade 200E, 4012, 4100, 4900, 7500, 7600, 48000, 300, 5100 and 5300 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 174
6 Fibre Channel port group TABLE 50 Object and OID Access Description swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.6 Read-write Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Possible values are: • enabled - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 175
Fibre Channel port group 6 TABLE 50 Object and OID Access Description swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.21 Read only Counts the number of encoding error or disparity error inside frames received. swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.22 Read only Counts the number - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 176
4100, 4900, 7500, 7600, and 48000. 8 Gbps is only applicable to the Brocade DCX director. NOTE: This object is deprecated. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.36 Read only Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE: The names - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 177
-2. The format of the address is in IPv6. The class of services supported by the port. This value is a hard-coded bitmap and indicates the supported services as follows: • Class F (1) • Class 1 (2) • Class F-1 (3) • Class 2 (4) • Class F-2 (5) • Class 1-2 (6) • Class F-1-2 (7) • Class 3 (8) • Class - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 178
. The table of event entries. The events will be received from the CHASSIS and the created logical switches. Only external RASlog messages are supported. These external messages are documented in the Fabric OS Message Reference. An entry of the event table. Every RASLOG message is identified with - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 179
Fabric Watch group 6 TABLE 52 Object and OID Access swEventTimeInfo Read only 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.2 swEventLevel Read only 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.3 swEventRepeatCount Read only 1.3.6.1.4.1.1588.2.1.1.1 .8.5.1.4 swEventDescr Read only 1.3.6.1.4.1.1588.2.1.1.1 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 180
variable to swFwApplyWrite; they can be removed by setting this variable to swFwCancelWrite. swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 Read only A default unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. C = environment (class), temperature - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 181
is used to point to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) operation sets the variable to 2 (swFwDefault), the following default configuration variables are used for the Fabric Watch classArea - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 182
6 Fabric Watch group TABLE 53 Object and OID Access Description swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 6 Read only Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold. swFwDefaultBelowActs - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 183
OID Access Description swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 6 Read-write Pointer to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete. If the write - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 184
6 Fabric Watch group TABLE 53 Object and OID Access Description swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Read only Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1). For example, the indexes for - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 185
(Threshold names) envFan001 envPS002 envTemp001 sfpTemp001 sfpRXP001 sfpTXP001 sfpCrnt001 sfpVolt001 sfpGS000 eportCRCs007 eportLink007 Env Fan 1 (Not supported) Env Power Supply 2 (Not supported) Env Temperature 1 GBIC Temperature 1 GBIC RX power 1 GBIC TX power 1 GBIC Current 1 SFP Voltage 1 SFP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 186
7 E Port State Changes 7 E Port Loss of Sync 7 E Port TX Performance 7 E Port Invalid Words 7 E Port Link Reset 7 E Port Util 7 (Not supported) E Port Trunk Util 7 E Port C3 Discard 7 E Port Packet Loss 7 (Not supported) Fabric Domain ID Fabric E-port down Fabric Fabric login Fabric FabricQL (Not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 187
Security RSNMP Violations 0 (Not supported) Security WSNMP Violations 0 (Not supported) Security SES Violations 0 (Not supported) Security MS Violations 0 (Not supported) Security Serial Violations 0 (Not supported) Security Front Panel Violations 0 (Not supported) Security SCC Violations 0 Security - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 188
Extension Blade. NOTE The FCU port is supported on the following platforms only: Brocade 3016 Brocade 3014 Brocade 4012 Brocade 4020 Brocade 4016 Brocade 4024 Brocade 4018 Brocade 4424 Brocade 5440 Brocade 5450 Brocade 5460 Brocade 5410 Brocade 5480 Brocade 5470 End device group TABLE 55 Object - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 189
21.1.1.8 swEndDeviceInvalidCRC Read only Invalid CRC count for the end device. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Switch group Switch group is not supported. TABLE 56 Object and OID Access Description swGroup 1.3.6.1.4.1.1588.2.1.1.1.22 Not The OID sub-tree for switch group. accessible - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 190
that occurred on the frames destined to each possible AL_PA attached to a specific port. For the Brocade 4100, this value will always be 0. CRC counters are not supported on this platform. swBlmPerfEEMntTable Not End-to-end monitoring counter table. 1.3.6.1.4.1.1588.2.1.1.1.23.2 accessible - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 191
Bloom performance monitor group 6 TABLE 57 Object and OID Access Description swBlmPerfEERefKey Read only 1.3.6.1.4.1.1588.2.1.1.1.23.2. 1.2 This object identifies the reference number of the counter. This reference is a number assigned when a filter is created. In the SNMP Index, start with - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 192
swTrunkTable Not This object displays trunking information for the switch. 1.3.6.1.4.1.1588.2.1.1.1.24.2 accessible For the Brocade 4100, cc ports per trunk are supported. swTrunkEntry Not Entry for the trunking table. 1.3.6.1.4.1.1588.2.1.1.1.24.2. accessible 1 swTrunkPortIndex Read only - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 193
Toptalker group 6 TABLE 58 Object and OID Access Description swTrunkGrpTx Read only 1.3.6.1.4.1.1588.2.1.1.1.24.3. 1.3 swTrunkGrpRx Read only 1.3.6.1.4.1.1588.2.1.1.1.24.3. 1.4 Gives the aggregate value of the transmitted words from this trunk group. NOTE: The syntax for this MIB - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 194
6 CPU or memory usage group TABLE 59 Object and OID Access Description swTopTalkerMntDpid Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.4 swTopTalkerMntflow Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.5 swTopTalkerMntSwwn Read only 1.3.6.1.4.1.1588.2.1.1.1.25.3. 1.6 swTopTalkerMntDwwn - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 195
Switch connectivity unit port statistics extension table 6 TABLE 60 Object and OID Access Description swMemUsageLimit 1.3.6.1.4.1.1588.2.1.1.1. 26.8 swMemPollingInterval 1.3.6.1.4.1.1588.2.1.1.1. 26.9 swMemAction 1.3.6.1.4.1.1588.2.1.1.1. 26.10 swMemUsageLimit1 1.3.6.1.4.1.1588.2.1.1.1. 26.11 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 196
6 Switch connectivity unit port statistics extension table TABLE 61 Object and OID Access Description swConnUnitStopTenancySt arVation 1.3.6.1.4.1.1588.2.1.1.1. 27.1.5 Read only swConnUnitOpend 1.3.6.1.4.1.1588.2.1.1.1. 27.1.6 Read only swConnUnitTransferConne ction 1.3.6.1.4.1.1588.2.1.1.1. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 197
Switch connectivity unit port statistics extension table 6 TABLE 61 Object and OID Access Description swConnUnitUnknownInterr upts 1.3.6.1.4.1.1588.2.1.1.1. 27.1.20 Read only swConnUnitTimedOut 1.3.6.1.4.1.1588.2.1.1.1. 27.1.21 Read only swConnUnitProcRequired 1.3.6.1.4.1.1588.2.1.1.1. 27 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 198
6 Switch connectivity unit port statistics extension table 178 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 199
HA-MIB overview The HA-MIB provides information about the High Availability features of Fabric OS v6.3.0. This MIB is supported only in Fabric OS v4.1.0 and later (and is not supported in Fabric OS v3.x or Fabric OS v2.6.x). The descriptions of each of the MIB variables in this chapter come - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 200
7 HA-MIB overview - haMIB (1.3.6.1.4.1.1588.2.1.2) - highAvailability (1.3.6.1.4.1.1588.2.1.2.1) - haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 201
High-Availability group 7 TABLE 62 Object Objects imported into the HA-MIB (Continued) Imported from this module DisplayString TimeStamp SNMPv2-TC High-Availability group This section describes the MIB objects in the High-Availability group. TABLE 63 Object and OID Access Description - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 202
zero for other FRUs. .TABLE 65 Platform Valid FRU counts for the various Brocade switches Blades Fans Brocade 3850 Brocade 3900 Brocade 4012 Brocade 4100 Brocade 4900 Brocade 5000 Brocade 7500 Brocade 7600 Brocade 12000 Brocade 24000 Brocade 48000 NA NA NA NA NA NA NA NA 8 port blades 2 CP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 203
switches (Continued) Blades Fans Power supply Brocade DCX Brocade DCX-4S Brocade 300 Brocade 5100 Brocade 5300 Brocade 8000 Brocade 7800 Extension Switch Brocade 6505 Brocade 6510 Brocade 6520 Brocade DCX 8510-8 Backbone Brocade DCX 8510-4 Backbone Brocade VA-40FC 8 port blades 2 CP blades - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 204
at which this event happened. 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 fruHistoryFactoryPartNum Read only The Brocade part number of the FRU object. 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 fruHistoryFactorySerialNum Read only The Brocade serial number of the FRU object. 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 CP table - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 205
HA-MIB traps 7 TABLE 67 Object and OID Access Description cpIpMask 1.3.6.1.4.1.1588.2.1.2.1.7.1.3 cpIpGateway 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 Read only Read only Read only The IP mask of the Ethernet interface of this CP. The IP address of the IP - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 206
7 HA-MIB traps 186 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 207
195 FICON MIB overview The FICON MIB module (LINK-INCIDENT-MIB) defines support for FICON in Fabric OS v4.1.2 and later. This MIB addresses link incident and link failure data for FICON hosts and devices connected to a Brocade switch. The descriptions of each of the MIB variables in this chapter - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 208
8 FICON MIB overview - iso - org - dod - internet - private - enterprises - bcsi - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 62 Overall tree structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 209
FICON MIB overview 8 - LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 - LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 - LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 - LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 - LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 - ficonRLIR - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 210
8 FICON MIB overview TABLE 69 Name FICON MIB textual conventions (Continued) Status Description Syntax RLIRLinkFailureType RNIDManufacturer RNIDTagType LinkWwn RegType RNIDSequenceNumber RNIDManufacturerPlant RNIDParams PortType RNIDFlags LinkFormat RNIDType Current Current Current Current - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 211
FICON RNID group 8 FICON RNID group This group contains all Request Node Identification Data (RNID) group objects for FICON. TABLE 70 Object and OID Access Description nodeRNIDTableNumEntries Read only 1.3.6.1.4.1.1588.2.1.1.50.2. 1 The number of entries in Request Node Identification Data ( - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 212
8 FICON RNID group TABLE 70 Object and OID Access Description nodeRNIDPortType Read only 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.11 Port type (N, NL, E, or virtual port) of the connected port. nodeRNIDFormat Read only 1.3.6.1.4.1.1588.2.1.1.50.2. 2.1.12 Node identification data format of the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 213
containing LIRR information. Index into the LIRR table. WWN of the Listener port. PID for the Listener port. Registration type: conditional or unconditional. Protocol type supported. Fabric OS MIB Reference 193 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 214
8 FICON RLIR group TABLE 71 Object and OID Access LIRRPortType Read only 1.3.6.1.4.1.1588.2.1.1.5 0.3.2.1.6 LIRRFormat Read only 1.3.6.1.4.1.1588.2.1.1.5 0.3.2.1.7 Description Attached port type. Registration type: conditional or unconditional. FICON RLIR group This group contains all - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 215
LinkIncident MIB traps group 8 TABLE 72 Object and OID Access rLIRTimeStamp Read only 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 rLIRFormat Read only 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 Description RLIR time stamp. RLIR Format. LinkIncident MIB traps group TABLE 73 Trap name and OID Variables - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 216
8 LinkIncident MIB traps group 196 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 217
-specific information and are provided by Brocade. The object types in FCMGMT-MIB are organized into the following groups: • Connectivity • Trap Registration • Revision Number • Statistic Set • Service Set NOTE The port swap feature will not have any effect on SNMP for FA MIB. FCMGMT-MIB system - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 218
9 FibreAlliance MIB overview - iso - org - dod - internet - experimental - fcmgmt - connSet - uNumber 1.3.6.1.3.94.1.1 - systemURL 1.3.6.1.3.94.1.2 + connUnitTable 1.3.6.1.3.94.1.6 + connUnitRevsTable 1.3.6.1.3.94.1.7 + connUnitSensorTable 1.3.6.1.3.94.1.8 + connUnitPortTable 1.3.6.1.3.94.1.10 + - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 219
FibreAlliance MIB overview 9 - connUnitTable 1.3.6.1.3.94.1.6 - connUnitEntry 1.3.6.1.3.94.1.6.1 - connUnitId 1.3.6.1.3.94.1.6.1.1 - connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 - connUnitType 1.3.6.1.3.94.1.6.1.3 - connUnitNumports 1.3.6.1.3.94.1.6.1.4 - connUnitState 1.3.6.1.3.94.1.6.1.5 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 220
9 FibreAlliance MIB overview - connUnitPortTable 1.3.6.1.3.94.1.10 - connUnitPortEntry 1.3.6.1.3.94.1.10.1 - connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 - connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 - connUnitPortType 1.3.6.1.3.94.1.10.1.3 - connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 221
FibreAlliance MIB overview 9 - connUnitLinkTable 1.3.6.1.3.94.1.12 - connUnitLinkEntry 1.3.6.1.3.94.1.12.1 - connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 - connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 - connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 - connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 222
9 FibreAlliance MIB overview - connUnitPortStatTable 1.3.6.1.3.94.4.5 - connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 - connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 - connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 - connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 - connUnitPortStatCountTxObjects 1.3.6.1.3.94 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 223
FibreAlliance MIB overview 9 - connUnitServiceSet - connUnitServiceScalars - connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 74 ConnUnitServiceScalars hierarchy - connUnitServiceSet - connUnitServiceTables - connUnitSnsTable 1.3.6.1.3.94.5.2.1 - connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 - connUnitSnsId - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 224
) Debug status. 10 (mark) All messages logged. 1 (unknown) 2 (other) None of 3-14. 3 (hub) Passive connectivity unit supporting loop protocol. 4 (switch) Active connectivity unit supporting multiple protocols. 5 (gateway) Unit that not only converts the interface but also encapsulates the frame into - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 225
data during a launch. USER Replace with username PASSWORD Replace with password GLOBALID Replace with global ID SERIALNO Replace with serial particular unit. Read only This object indicates the WWN of the switch. The Brocade implementation maps the switch WWN to the first 8 octets of this object - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 226
LAN address (prefixed with the appropriate NAA) as its connUnitId. But if the Ethernet is a replaceable PCCard, the hub should have an independent ID. The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the remaining lower 8 octets to 0. For example: If - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 227
blade. The maximum number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 5100 40 ports Brocade 5300 Brocade 7500 or 7500E Brocade 7600 80 ports 32 ports 16 ports Brocade 7800 Extension Switch 24 ports - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 228
unit. Set to the SSN (which by default is the WWN). The number of centiseconds since ); otherwise, for a fabric switch it is set to 2 (no). For a Brocade Access Gateway device, since the switch is behaving as a device management tool and not supported. 208 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 229
a union of change information for connUnitConfigurationChangeTime NOTE: This object is not supported. The number of revisions in connUnitRevsTable. Set to 2. Number of zones switch set to sysDescr and read only. For a Brocade Access Gateway device set to "Access Gateway." Fabric OS MIB Reference 209 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 230
• onlineConnUnit = enable switch • default after reboot = unknown The declaration 1 (unknown) maps to the default value upon rebooting, and 2 ( 9 (debug). Number of events currently in connUnitEventTable. Fabric OS currently supports 1024 raslog events. Maximum number of events that can be defined in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 231
and another entry for the Fabric OS version. For example, for the Brocade 4100 the hardware platform number is 32.0. The Fabric OS version for version. Index 2 returns the software version. Table of the sensors supported by each connectivity unit managed by this agent. For specific sensor counts - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 232
is a keyword. • airflow (7) • frequency (8) • power (9) • door (10) - Not supported in Fabric OS v2.6.1. Generic information on ports for a specific connUnit NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. 212 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 233
number of supported physical ports are as follows: NOTE: The following list does not includes the virtual ports. You can create additional virtual ports in virtual fabrics. Brocade 300 Brocade 4100 Brocade 4900 Brocade 5000 Brocade 5100 Brocade 5300 Brocade 7500 or 7500E Brocade 7600 Brocade 7800 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 234
this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway, both the F_Port and N_Port this value is 0x0008. An Access Gateway supports class-three services only, therefore the value is 8 for both port types. connUnitPortFCClassCap attribute is dependent on the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 235
, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008. A Brocade Access Gateway supports class-three services only, therefore the value is 8 for both port types. connUnitPortFCClassOp is independent of the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 236
are: • unknown (1) • other (2) • unused (3) • shortwave (4) • longwave (5) • copper (6) • scsi (7) • longwaveNoOFC (8) • shortwaveNoOFC (9) • longwaveLED (10) • ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 237
FC ID is formatted "DD AA PP" (for example, "02 00 02"). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port ID has the same DD with a different AA value for each link. The Brocade Access Gateway "PP" is the port number for F_Ports and is always zero - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 238
9 Connectivity unit group TABLE 75 Object and OID connUnitPortControl 1.3.6.1.3.94.1.10.1.16 Access Description Read-write Controls the addressed connUnit's port. Valid commands are: resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 239
. The maximum number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 5100 40 ports Brocade 5300 80 ports Brocade 7500 or 7500E 32 ports Brocade 7600 16 ports Brocade 7800 Extension Switch 24 ports - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 240
:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. The N_Ports on a Brocade Access Gateway are the WWN of the switch (that is, it is the same as the connUnitId). The F_Ports are the WWN of the HBA - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 241
, and information should be reported in this table. This table contains the 1024 most-recent event log entries. Only external RASlog messages are supported. Fabric OS v4.4.0 and later releases do not have Panic or Debug level messages. All external messages are documented in the Fabric OS Message - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 242
9 Connectivity unit group TABLE 75 Object and OID connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 connUnitEventType 1.3.6.1.3.94.1.11.1.7 connUnitEventObject 1.3.6.1.3.94.1.11.1.8 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 Access Read only Description This is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 243
local) and the Y (remote) values need to have one valid value. A Brocade Access Gateway has no ISLs (InterSwitch Links); therefore all F_Port and N_Port connections display ISL XISL A XISL belongs to the base fabric and by default carries frames of the base fabric and for other fabrics using the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 244
9 Connectivity unit group TABLE 75 Object and OID connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 Access Read only connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 Read only connUnitLinkPortNumbe Read only rX 1.3.6.1.3.94.1.12.1.4 connUnitLinkPortWwnX Read only 1.3.6.1.3.94.1.12.1.5 connUnitLinkNodeIdY - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 245
Type of the FC connectivity unit, as defined in connUnitType. • ISL- Switch device. • End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. Table 76 displays the types of the connectivity unit. This is the Fibre Channel ID of this port. If the connectivity unit is - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 246
This is the sum of all classes. If you cannot keep the by-class counters, then keep the sum counters. NOTE: This object is not supported. connUnitPortStatCountP BSYFrames 1.3.6.1.3.94.4.5.1.11 Read only The number of times that PBSY was returned to this port as a result of a frame that could not - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 247
1 Frame that was rejected at the destination N_Port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames. Return value- 800000000 NOTE: This object is not supported. connUnitPortStatCountCl Read only The number of Class 2 Frames received at this port. ass2RxFrames This - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 248
Frame that was rejected by the fabric. This is a Fibre Channel only statistic. Return value - 800000000 NOTE: This object is not supported. connUnitPortStatCountCl Read only ass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 The number of times that FRJT was returned to this port as a result of a Class 2 Frame - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 249
of offline primitive sequence received at this port. This is a Fibre Channel only statistic. Return Value - 800000000 NOTE: This object is not supported. connUnitPortStatCountLi Read only The number of link failures. This count is part of the Link Error Status nkFailures Block (LESB). (FC-PH 29 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 250
table contains an entry for each object registered with this port in the switch. Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. A Brocade Access Gateway has no name server information; therefore this table is disabled. Not The simple name server (SNS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 251
table. connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 Read only The Classes of Service offered by this entry in the SNS table. to FF. connUnitSnsFC4Type 1.3.6.1.3.94.5.2.1.1.9 Read only The FC-4 types supported by this entry in the SNS table. connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 Read - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 252
Read only Description The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6. The current this host that have a severity level less than or equal to this value. The default value of this object is Warning. The mapping between errorlog severity level and this variable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 253
then a new row is created. The values of the optional columns are set to default values. Traps are not enabled to be sent to the target. If the row Table (connUnitPortStatTable) is supported in FOS v2.6.1, v5.x, and v6.0 and later versions. Brocade does not support the following: • Connectivity - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 254
connUnitEventType connUnitEventObject connUnitEventDescr For information on how the switch status is determined, refer to the Fabric Watch Administrator's Guide. A connUnit has been deleted from this agent. Recommended severity level (for filtering) - warning. Not implemented. An event has - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 255
94.0.6 connUnitPortStatus connUnitPortState For information on configuring thresholds that generate these traps, refer to the Fabric Watch Administrator's Guide. Overall status of the connectivity unit changed. Recommended severity level (for filtering)- alert. This trap sends the instance - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 256
9 FibreAlliance MIB traps 236 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 257
Chapter FibreAlliance Extension MIB Objects 10 In this chapter •FibreAlliance extension MIB overview 237 •SFP statistics table 239 •Port configuration table for Fabric Assigned PWWN feature 239 •Port configuration table for encryption or compression feature 240 FibreAlliance extension MIB - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 258
10 FibreAlliance extension MIB overview - faExt (1.3.6.1.4.1.1588.2.1.1.1.28) - swSfpStatTable (1.3.6.1.4.1.1588.2.1.1.1.28.1) - swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1.1 - swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1 - swSfpVoltage 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2 - swSfpCurrent - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 259
SFP statistics table 10 SFP statistics table TABLE 85 Object and OID Access Description swSfpStatTable Not This table represents the diagnostic statistics of Small Form-factor 1.3.6.1.4.1.1588.2.1.1.1.28.1 accessible Pluggable (SFP) optical transceivers. swSfpStatEntry Not An entry - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 260
not enabled for compression. swPortCipherKeySize Read only 1.3.6.1.4.1.1588.2.1.1.1.28.3. 1.3 The object represents the cipher key size. Fabric OS supports 256 bytes per key. swPortCipherMode Read only 1.3.6.1.4.1.1588.2.1.1.1.28.3. 1.4 The object represents the cipher mode. Valid values - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 261
Switch connectivity unit port table 10 Switch connectivity unit port table TABLE 88 Object and OID swConnUnitPortTable 1.3.6.1.4.1.1588.2.1.1.1.28.4 swConnUnitPortEntry 1.3.6.1.4.1.1588.2.1.1.1.28.4.1 swConnUnitPortCapableSpeeds 1.3.6.1.4.1.1588.2.1.1.1.28.4.2 swConnUnitPortSpeedMode 1.3.6.1.4.1. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 262
10 Switch connectivity unit port table 242 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 263
come directly from the MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The following FCIP MIB tables are supported. • FCIP entity instance table • FCIP link table • FCIP TCP connection table • FCIP extended link table - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 264
11 FCIP MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 + fcipTcpConnTable .6 FIGURE 78 High level organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 fcipEntityId - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 265
blade: • ipif 0 in FCIP GbE port 0/ge0 Example for Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade: • Circuit 0 in FCIP VE port 12 The type of Internet address by which the entity is reachable. Only address types IPv4 and IPv6 are supported. Fabric OS MIB Reference 245 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 266
only listens on the Well-Known port. The default is 0. Not used. An indication of whether the FCIP Entity supports protection against sequence number wrap Not used. An indication of whether the FCIP Entity supports PHB IP quality of service (QoS). Not Used. This object specifies the operational - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 267
224.1.1.5.1.12 FCIP TCP connection table This table is supported only for Brocade 7500 and FR4-18i router blade. TABLE 91 Not The remote port number for this TCP connection. accessible Read only The default maximum TCP Receiver Window size for this TCP connection. Read only The TCP Maximum - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 268
the number of packets lost for FC control traffic and data transfer over an FCIP tunnel. NOTE: This object is not supported. fcipExtendedLinkCompressi onRatio 1.3.6.1.4.1.1588.4.1.1.4 Read only The ratio between compressed bytes and raw bytes over an FCIP tunnel. fcipExtendedLinkTcpSmooth edRTT - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 269
latency details. This table also gives details about FCIP circuit statistics for the Brocade 7800 Extension Switch or FX8-24 DCX Extension Blade. This table is not supported for the Brocade 7500 or FR4-18i router blade. Corresponding CLI command: portshow fcipcircuit -t/-q -perf fcipConnStatsEntry - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 270
11 FCIP connection statistics table 250 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 271
directly from the MIB itself. The notes that follow the descriptions typically pertain to Brocade-specific information and are provided by Brocade. The following iSCSI MIB tables are supported: • iSCSI Instance Attributes table • iSCSI Node Attributes table • iSCSI Session Attributes table • iSCSI - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 272
12 iSCSI MIB overview - iso - org - dod - internet - experimental - mgmt - mib-2 - iscsimibmodule - iscsiObjects - iscsiInstance + iscsiInstanceAttributesTable - iscsiPortal - iscsiTargetPortal - iscsiInitiatorPortal - iscsiNode + iscsiNodeAttributesTable - iscsiTarget - iscsiTgtAuthorization - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 273
iSCSI MIB overview 12 - iscsiNodesAttributesEntry iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 274
reboots.This value is not accessible. iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 Read only A UTF-8 string to describe the iSCSI instance. Only a single instance is supported so the value will be 0. When used with multiple iSCSI instances, it may be used in an implementation dependent manner to - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 275
a discontinuity in one or more counters used by this instance. NOTE: This object is not supported. iSCSI node attributes table This table is a list of iSCSI nodes per each iSCSI instance present into a set of addresses through various discovery services. Fabric OS MIB Reference 255 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 276
The maximum number of bytes that can be sent within a single sequence of data-in or data-out PDUs. NOTE: This object is not supported. iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.11 Read-write The maximum number of connections allowed in each session to or from this node. Hard coded to two - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 277
SysUpTime at the most recent occurrence of a discontinuity in one or more counters used by this node. NOTE: This object is not supported. iscsiNodeStorageType 1.3.6.1.2.1.142.1.1.5.1.1.18 Read-write The storage type for all read-write objects within this row. Rows in this table are always created - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 278
outstanding requests-to-transmit (R2Ts) per iSCSI task within this session. The maximum length supported for unsolicited data sent within this session. The maximum number of bytes that can be except during error recovery.The default value for this is True. 258 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 279
continuously increasing addresses, with no gaps or overlay between PDUs. Default is true. The level of error recovery negotiated between the current value of SysUpTime. NOTE: This object is not supported. iSCSI session statistics table The isciSessionStatsTable contains performance statistics based - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 280
has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. NOTE: This object is not supported. iSCSI connection attributes table The isciConnectionAttributesTable contains a list of active connections within each session. TABLE 98 Object and OID - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 281
th PDUs able to be received on this connection. 1.3.6.1.2.1.142.1.1.11.1.1.10 iscsiCxnMaxXmitDataSegLengt Read only The maximum data payload size supported for command or data h PDUs able to be sent on this connection.The value is 1.3.6.1.2.1.142.1.1.11.1.1.11 min(iscsiCxnMaxRecvDataSegLength - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 282
12 iSCSI connection attributes table 262 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 283
MIB variables in this chapter come directly from the SNMPv2 MIB itself. The notes that follow the descriptions refer to Brocade-specific information and are provided by Brocade. SNMPv2 MIB object hierarchy Figure 90 through Figure 93 depict the organization and structure of SNMPv2 MIB. - iso - org - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 284
indicates the expected maximum round trip time for communicating with the transport address defined by this row. Read create This object specifies a default number of retries to be attempted when a response is not received for a generated message. Read create This object contains a list of tag - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 285
return an inconsistentValue error if an attempt is made to set this variable to a value for a security model which the implementation does not support. The security name which identifies the principal on whose behalf the SNMP messages will be generated using this entry. Fabric OS MIB Reference 265 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 286
13 SNMP community table TABLE 100 Object and OID Access Description snmpTargetParamsSecurityLevel 1.3.6.1.6.3.12.1.3.1.5 snmpTargetParamsStorageType 1.3.6.1.6.3.12.1.3.1.6 snmpTargetParamsRowStatus 1.3.6.1.6.3.12.1.3.1.7 Read create Read create Read create The level of security to be used when - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 287
context in which the management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. The default value is the snmpEngineID of the entity in which this object is instantiated. The context in which the management information is accessed - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 288
13 SNMP community table 268 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 289
this chapter come directly from the SNMP-USER-BASED-SM-MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 94 and Figure 95 depict the organization and structure of the usmMIBObjects MIB. - iso - org - dod - internet - snmpV2 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 290
14 USM statistics - usmMIBObjects (1.3.6.1.6.3.15.1) - usmStats 1.3.6.1.6.3.15.1.1 - usmStatsUnsupportedSecLevels 1.3.6.1.6.3.15.1.1.1 - usmStatsNotInTimeWindows 1.3.6.1.6.3.15.1.1.2 - usmStatsUnknownUserNames 1.3.6.1.6.3.15.1.1.3 - usmStatsUnknownEngineIDs 1.3.6.1.6.3.15.1.1.4 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 291
string representing the user in Security Model independent format. The default transformation of the User-based Security Model dependent security ID and if so, the type of privacy protocol which is used. No support for Privacy protocols other than DES in this object. usmUserPrivKeyChange Read create - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 292
14 USM user group TABLE 103 Object and OID Access usmUserOwnPrivKeyCha nge 1.3.6.1.6.3.15.1.2.2.1.1 0 Read create usmUserPublic 1.3.6.1.6.3.15.1.2.2.1.1 1 Read create usmUserStorageType 1.3.6.1.6.3.15.1.2.2.1.1 2 Read create usmUserStatus 1.3.6.1.6.3.15.1.2.2.1.1 3 Read create Description - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 293
variables in this chapter come directly from the IEEE 802.1x PAE MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 96 through Figure 98 depict the organization and structure of the IEEE 802.1x PAE MIB. - iso - std - iso8802 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 294
15 IEEE 802.1x PAE MIB objects overview - dot1xPaeAuthenticator - dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 - dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 - dot1xAuthPaeState 1.0.8802.1.1.1.1.2.1.1.1 - dot1xAuthBackendAuthState 1.0.8802.1.1.1.1.2.1.1.2 - dot1xAuthAdminControlledDirections 1.0.8802 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 295
port number associated with this port. The protocol version associated with this port. Indicates the PAE functionality that this port supports and that may be managed through this MIB. Valid values: • dot1xPaePortAuthCapable (0) • dot1xPaePortSuppCapable (1) The initialization control for this port - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 296
15 Dot1x PAE authenticator group Dot1x PAE authenticator group TABLE 105 object and OID Access Description dot1xAuthConfigTable 1.0.8802.1.1.1.1.2.1 Not accessible dot1xAuthConfigEntry 1.0.8802.1.1.1.1.2.1.1 Not accessible dot1xAuthPaeState Read only 1.0.8802.1.1.1.1.2.1.1.1 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 297
Dot1x PAE authenticator group 15 TABLE 105 object and OID Access Description dot1xAuthServerTimeout Read-write 1.0.8802.1.1.1.1.2.1.1.1 0 dot1xAuthMaxReq Read-write 1.0.8802.1.1.1.1.2.1.1.1 1 dot1xAuthReAuthPeriod Read-write 1.0.8802.1.1.1.1.2.1.1.1 2 dot1xAuthReAuthEnable d 1.0.8802 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 298
15 Dot1x PAE authenticator group TABLE 105 object and OID Access Description dot1xAuthInvalidEapolFr Read only amesRx 1.0.8802.1.1.1.1.2.2.1.9 dot1xAuthEapLengthErro rFramesRx 1.0.8802.1.1.1.1.2.2.1.1 0 Read only dot1xAuthLastEapolFram eVersion 1.0.8802.1.1.1.1.2.2.1.1 1 Read only - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 299
Dot1x PAE authenticator group 15 TABLE 105 object and OID Access Description dot1xAuthAuthEapLogoff Read only WhileAuthenticating 1.0.8802.1.1.1.1.2.3.1.9 dot1xAuthAuthReauthsW hileAuthenticated 1.0.8802.1.1.1.1.2.3.1.1 0 Read only dot1xAuthAuthEapStarts WhileAuthenticated 1.0.8802 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 300
(2) • supplicantRestart (3) • reauthFailed (4) • authControlForceUnauth (5) • portReInit (6) • portAdminDisabled (7) • notTerminatedYet (999) The user name representing the identity of the supplicant PAE. NOTE dot1xPaeSupplicant group is not supported. 280 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 301
of the MIB variables in this chapter come directly from the LLDP MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 99 through Figure 103 depict the organization and structure of the LLDP MIB. Fabric OS MIB Reference 281 53 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 302
16 LLDP MIB objects overview - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpNotifications - lldpObjects - lldpConfiguration - lldpMessageTxInterval - lldpMessageTxHoldMultiplier - lldpReinitDelay - lldpTxDelay - lldpNotificationInterval - lldpPortConfigTable - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 303
LLDP MIB objects overview 16 - lldpStatistics - lldpStatsRemTablesLastChangeTime 1.0.8802.1.1.2.1.2.1 - lldpStatsRemTablesInserts 1.0.8802.1.1.2.1.2.2 - lldpStatsRemTablesDeletes 1.0.8802.1.1.2.1.2.3 - lldpStatsRemTablesDrops 1.0.8802.1.1.2.1.2.4 - lldpStatsRemTablesAgeouts 1.0.8802.1.1.2.1.2.5 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 304
remote systems data components. NOTE LLDP notifications are not supported. LLDP configuration group TABLE 106 object and OID The interval at which LLDP frames are transmitted on behalf of the LLDP agent. The default value for this object is 30 seconds. The value of this object must be restored - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 305
lldpMessageTxInterval is 30, and the value of lldpMessageTxHoldMultiplier is 4, then the value 120 is encoded in the TTL field in the LLDP header. The default value for this object is four seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 306
. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. This table is not supported. LLDP statistics group TABLE 107 object and OID Access Description lldpStatistics 1.0.8802.1.1.2.1.2 Not LLDP statistics group. accessible lldpStatsRemTablesLastCha Read - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 307
that LLDP header formatting problems may exist with the local LLDP agent in the sending system or that LLDPDU validation problems may exist with the identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 308
The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object. lldpLocManAddrTable 1.0.8802.1.1.2.1.3.8 Not This table contains management - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 309
1.0.8802.1.1.2.1.4.1.1.10 system. lldpRemSysCapSupported Read only The bitmap value used to identify which system capabilities are 1.0.8802.1.1.2.1.4.1.1.11 supported on the remote system. lldpRemSysCapEnabled Read only The bitmap value used to identify which system capabilities are enabled - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 310
16 LLDP MIB TABLE 109 object and OID Access Description lldpRemManAddr 1.0.8802.1.1.2.1.4.2.1.2 Not The string value used to identify the management address component accessible associated with the remote system. The purpose of this address is to contact the management entity. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 311
LLDP-EXT-DOT1-MIB 16 LLDP-EXT-DOT1-MIB The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. LLDP-EXT-DOT1-MIB organization Figure 104 and Figure 105 depict the organization and structure of the LLDP-EXT-DOT1-MIB. - iso - std - iso8802 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 312
16 LLDP-EXT-DOT1-MIB - lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1 - lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.1.1 - lldpXdot1ConfigPortVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.1.1.1 - lldpXdot1ConfigVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.1.2 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 313
LLDP-EXT-DOT1-MIB 16 lldpXdot1 configuration group TABLE 110 object and OID Access Description lldpXdot1Config 1.0.8802.1.1.2.1.5.329 62.1.1 Not IEEE 802.1 configuration group. accessible lldpXdot1ConfigPortVlan Table 1.0.8802.1.1.2.1.5.329 62.1.1.1 Not accessible A table that controls - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 314
VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation. This object displays zero although the TE interfaces are associated with VLANS. NOTE: This object takes the value from the PVID - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 315
the port and protocol VLANs are enabled on the given port associated with the local system. If fcoeport is configured then that interface supports protocol-based VLAN and lldpXdot1LocProtoVlanEnabled should return true (1). This is the local property of the interface and it does not depend on - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 316
port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port port (associated with the remote system) is capable of supporting port and protocol VLANs. lldpXdot1RemProtoVlanE nabled 1.0.8802.1.1.2.1.5.329 62 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 317
LLDP-EXT-DOT3-MIB 16 TABLE 112 object and OID Access Description lldpXdot1RemVlanName 1.0.8802.1.1.2.1.5.329 62.1.3.3.1.2 Read only The string value used to identify VLAN name identified by the VLAN ID associated with the remote system. lldpXdot1RemProtocolTa ble 1.0.8802.1.1.2.1.5.329 62 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 318
16 LLDP-EXT-DOT3-MIB - iso - std - iso8802 - ieee802dot1 - ieee802dot1mibs - lldpMIB - lldpObjects - lldpExtensions - lldpXdot3MIB - lldpXdot3Objects - lldpXdot3Config - lldpXdot3PortConfigTable - lldpXdot3LocalData - lldpXdot3LocPortTable - lldpXdot3LocPowerTable - lldpXdot3LocLinkAggTable - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 319
.1.1.2.1.5.462 3.1.2.1.1.1 Read only The truth value used to indicate whether the given port (associated with the local system) supports auto-negotiation. lldpXdot3LocPortAutoNe gEnabled 1.0.8802.1.1.2.1.5.462 3.1.2.1.1.2 Read only The truth value used to indicate whether port auto-negotiation - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 320
the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and if it does not support link aggregation, this value should be set to zero. lldpXdot3LocMaxFrameS izeTable 1.0.8802.1.1.2.1.5.462 3.1.2.4 Not accessible This table contains one row per port of - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 321
8802.1.1.2.1.5.462 3.1.3.1.1.1 Read only The truth value used to indicate whether the given port (associated with remote system) supports auto-negotiation. lldpXdot3RemPortAutoN egEnabled 1.0.8802.1.1.2.1.5.462 3.1.3.1.1.2 Read only The truth value used to indicate whether port auto-negotiation - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 322
frame size information about a particular port component. lldpXdot3RemMaxFrame Size 1.0.8802.1.1.2.1.5.462 3.1.3.4.1.1 Read only An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. 302 Fabric OS MIB Reference 53 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 323
in this chapter come directly from the IEEE 802.3 LAG MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 108 through Figure 113 depict the organization and structure of the IEEE 802.3 LAG MIB. - iso - member-body - us - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 324
17 IEEE 802.3 LAG MIB overview - dot3adAggTable 1.2.840.10006.300.43.1.1.1 - dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 - dot3adAggIndex 1.2.840.10006.300.43.1.1.1.1.1 - dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.2 - dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.3 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 325
Aggregator group 17 - dot3adAggPortStatsTable 1.2.840.10006.300.43.1.2.2 - dot3adAggPortStatsEntry 1.2.840.10006.300.43.1.2.2.1 - dot3adAggPortStatsLACPDUsRx 1.2.840.10006.300.43.1.2.2.1.1 - dot3adAggPortStatsMarkerPDUsRx 1.2.840.10006.300.43.1.2.2.1.2 - dot3adAggPortStatsMarkerResponsePDUsRx 1.2. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 326
the local system. The current operational value of the key for the aggregator's current protocol partner. This is a 16-bit value. If the aggregation is manually configured, this key value will be a value assigned by the local System. The value of this 16-bit read-write attribute defines the maximum - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 327
value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation. NOTE: This object is not supported. Fabric OS MIB Reference 307 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 328
is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol partner. NOTE: This object is not supported. dot3adAggPortPartnerAd minKey 1.2.840.10006.300.43.1. 2.1.1.10 Read-write The current - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 329
Read only The priority value assigned to this aggregation port by the partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol partner. This is a 16-bit value. dot3adAggPortActorAdmin State 1.2.840.10006.300 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 330
This object represents the receive state machine for the Aggregation Port. Valid values: • current (1) • expired (2) • defaulted (3) • initialize (4) • lacpDisabled (5) • portDisabled (6) dot3adAggPortDebugLast RxTime 1.2.840.10006.300.43.1. 2.3.1.2 Read only The value of aTimeSinceSystemReset - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 331
Aggregator port group 17 TABLE 117 object and OID Access Description dot3adAggPortDebugActor ChurnState 1.2.840.10006.300.43.1. 2.3.1.5 Read only The state of the Actor Churn detection machine (43.4.17) for the aggregation port. Valid values: • noChurn - Indicates that the state machine is in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 332
17 Aggregator port group 312 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 333
in this chapter come directly from the MIB-II itself. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. Figure 114 through Figure 118 depict the organization and structure of the Bridge-MIB. - iso - org - dod - internet - directory - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 334
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - dot1dNotifications 1.3.6.1.2.1.17.0 - dot1d base group - dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1 - dot1dBaseNumPorts 1.3.6.1.2.1.17.1.2 - dot1dBaseType 1.3.6.1.2.1.17.1.3 - dot1dStp group - dot1dStpProtocolSpecification 1.3.6.1.2.1.17.2.1 - - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 335
Bridge-MIB overview 18 - dot1dBridge 1.3.6.1.2.1.17 - dot1dTp - dot1dTpPortOverflowTable 1.3.6.1.2.1.17.4.6 - dot1dTpPortOverflowEntry 1.3.6.1.2.1.17.4.6.1 - dot1dTpPortInOverflowFrames 1.3.6.1.2.1.17.4.6.1.1 - dot1dTpPortOutOverflowFrames 1.3.6.1.2.1.17.4.6.1.2 - dot1dTpPortInOverflowDiscards - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 336
18 Bridge-MIB overview - dot1dBridge 1.3.6.1.2.1.17 - qBridgeMIB - qBridgeMIBObjects - dot1qBase - dot1qVlanVersionNumber 1.3.6.1.2.1.17.7.1.1.1 - dot1qMaxVlanId 1.3.6.1.2.1.17.7.1.1.2 - dot1qMaxSupportedVlans 1.3.6.1.2.1.17.7.1.1.3 - dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 - dot1qGvrpStatus - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 337
1.3.6.1.2.1.17.2.19.1.4 - dot1dStpPortOperPointToPoint 1.3.6.1.2.1.17.2.19.1.5 - dot1dStpPortAdminPathCost 1.3.6.1.2.1.17.2.19.1.6 FIGURE 118 RSTP hierarchy Bridge-MIB The Bridge MIB module for managing devices that support IEEE 802.1D. Fabric OS MIB Reference 317 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 338
notification is sent for the same transition. dot1d base group This contains the objects that are applicable to all types of bridges (support only for default VLAN). TABLE 119 Object and OID Access Description dot1dBase 1.3.6.1.2.1.17.1 Not The OID sub-tree in the Bridge MIB for base group - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 339
the (8 octet long) bridge ID). The other (last) 6 octets of the bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0 through 61440, in steps of 4096. dot1dStpTimeSinceTopol Read only ogyChange 1.3.6.1.2.1.17.2.3 The - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 340
byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16. 320 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 341
spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. This object replaces dot1dStpPortPathCost to support IEEE 802.1t. dot1dTp group Implementation of the dot1dTp sub-tree is optional - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 342
18 Bridge-MIB TABLE 121 Object and OID dot1dTpFdbTable 1.3.6.1.2.1.17.4.3 dot1dTpFdbEntry 1.3.6.1.2.1.17.4.3.1 dot1dTpFdbAddress 1.3.6.1.2.1.17.4.3.1.1 dot1dTpFdbPort 1.3.6.1.2.1.17.4.3.1.2 dot1dTpFdbStatus 1.3.6.1.2.1.17.4.3.1.3 dot1dTpPortTable 1.3.6.1.2.1.17.4.4 dot1dTpPortEntry 1.3.6.1.2.1.17 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 343
frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. NOTE: This object is not supported. dot1dStaticStatus 1.3.6.1.2.1.17.5.1.1.4 Read create This object indicates the status of this entry. Values: • other (1) - This entry is currently in use - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 344
Group Registration defined by IEEE 802.1t-2001. The following tables are not supported: • dot1dTpHCPortTable • dot1dUserPriorityRegenTable • dot1dTrafficClassTable • dot1dPortOutboundAccessPriorityTable • dot1dPortGarpTable • dot1dPortGmrpTable TABLE 123 Object and OID Access Description - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 345
(4) - Shared VLAN Learning (SVL). • dot1qHybridCapable (5) - Both IVL & SVL simultaneously. • dot1qConfigurablePvidTagging (6) - Whether the implementation supports the ability to override the default PVID setting and its egress status (VLAN-tagged or untagged) on each port. • dot1dLocalVlanCapable - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 346
accessible is indexed by dot1dBasePort. dot1dPortDefaultUserPriori Read-write The default ingress user priority for this port. This only has effect on ty media, such as Ethernet, that do not support native user priority. 1.3.6.1.2.1.17.6.1.2.1.1.1 dot1dPortNumTrafficClass es 1.3.6.1.2.1.17 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 347
18 Q-Bridge MIB TABLE 126 Object and OID dot1qNumVlans 1.3.6.1.2.1.17.7.1.1.4 dot1qGvrpStatus 1.3.6.1.2.1.17.7.1.1.5 Access Description Read only The current number of IEEE 802.1Q VLANs that are configured in the device. Read-write The administrative status requested by management for GVRP. - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 348
18 Q-Bridge MIB TABLE 127 Object and OID Access Description dot1qTpFdbStatus 1.3.6.1.2.1.17.7.1.2.2.1.3 Read only The status of this entry. Values: • other (1) - This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 349
configured by the management in this VLAN for which the service requirement attribute Forward All Multicast Groups may not be dynamically by management in this VLAN for which the ForbiddenPorts service requirement attribute Forward Unregistered Multicast Groups 1.3.6.1.2.1.17.7.1.2.5.1.3 may - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 350
18 Q-Bridge MIB TABLE 128 Object and OID Access Description dot1qStaticUnicastStatus 1.3.6.1.2.1.17.7.1.3.1.1.4 Read-write This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 351
18 Q-Bridge MIB TABLE 128 Object and OID Access Description dot1qStaticMulticastForbid denEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.4 Read-write The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must not be forwarded, - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 352
18 Q-Bridge MIB TABLE 129 Object and OID Access Description dot1qVlanStatus 1.3.6.1.2.1.17.7.1.4.2.1.6 Read only This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 353
number of times the associated dot1qTpVlanPortInDiscards counter has overflowed. RSTP MIB The Bridge MIB Extension module for managing devices that support the Rapid Spanning Tree Protocol defined by IEEE 802.1w. TABLE 130 object and OID Access Description dot1dStpVersion 1.3.6.1.2.1.17.2.16 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 354
18 RSTP MIB TABLE 130 object and OID Access dot1dStpPortAdminEdge Read-write Port 1.3.6.1.2.1.17.2.19.1.2 dot1dStpPortOperEdgeP Read only ort 1.3.6.1.2.1.17.2.19.1.3 dot1dStpPortAdminPoint Read-write ToPoint 1.3.6.1.2.1.17.2.19.1.4 dot1dStpPortOperPointT Read only oPoint 1.3.6.1.2.1.17.2.19.1.5 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 355
this chapter come directly from the BD MIB. The notes that follow the descriptions typically pertain to Brocade-specific information as provided by Brocade. This MIB module is for the Brocade Bottleneck Detection feature. Figure 119 through Figure 122 depict the organization and structure of the BD - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 356
19 BD Traps - bdConfig - bdStatus 1.3.6.1.4.1.1588.2.1.1.51.1.1 - bdLThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.2 - bdCThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.3 - bdQTime 1.3.6.1.4.1.1588.2.1.1.51.1.4 - bdWinAvgTime 1.3.6.1.4.1.1588.2.1.1.51.1.5 - bdThreshold 1.3.6.1.4.1.1588.2.1.1.51.1.6 - nBdType - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 357
BD configuration 19 BD configuration The OID represents the Bottleneck configuration. NOTE When alerting is never enabled in the lifetime of the daemon, junk values are expected for alert-related parameters. When alerting is enabled before being disabled, non-junk values are expected for alert- - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 358
19 BD statistics TABLE 133 Object and OID Access Description bdNumOfEntries Read only 1.3.6.1.4.1.1588.2.1.1.51.2.1 The number of entries in the statistics table. bdStatsTable 1.3.6.1.4.1.1588.2.1.1.51.2. 2 Not accessible The table of stats entries represents both types of BD. This can - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 359
MIB Object Groupings Appendix A In this appendix •Switch variables 339 •Sensor variables 339 •Port variables 339 •Event variables 340 •ISL and end device variables 340 •SNMP configuration variables 340 •iSCSI instance information variables 341 Switch variables MIB variables that assist in - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 360
A Event variables •fcFxPortTable 79 •fcFxConfTable 95 •fcFxPortStatusTable 81 •fcFxPortPhysTable 81 •fcFxPortCapTable 86 •Fibre Channel port group 152 Variables for statistics and measurement •Statistics group 225 •fcFxPortErrorTable 83 •fcFxPortC2AccountingTable 85 •fcFeCapabilities group - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 361
iSCSI instance information variables A iSCSI instance information variables MIB variables that assist in gathering information about iSCSI instances are in the following tables. •iSCSI instance attributes table 254 •iSCSI node attributes table 255 •iSCSI session statistics table 259 Fabric OS - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 362
A iSCSI instance information variables 342 Fabric OS MIB Reference 53-1002750-01 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 363
94.4.5.1.26 swConnUnitLCRX 1.3.6.1.4.1.1588.2.1.1.1.27.1.16 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 Not supported connUnitPortStatCountTxMulticastObjects 1.3.6.1.3.94.4.5.1.30 swConnUnitRDYPriority 1.3.6.1.4.1.1588.2.1.1.1.27.1.17 connUnitPortStatCountBBCreditZero - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 364
B portErrShow command TABLE 134 portStatsShow command (Continued) Counters MIB Object MIB OID er64_enc_out er_bad_os er_rx_c3_timeout er_tx_c3_timeout er_c3_dest_unreach er_other_discard er_pcs_blk er_type1_miss er_type2_miss er_type6_miss er_zone_miss er_lun_zone_miss er_crc_good_eof - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 365
26 swConnUnitLCRX 1.3.6.1.4.1.1588.2.1.1.1.27.1.16 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 Not supported connUnitPortStatCountTxMulticastObjects 1.3.6.1.3.94.4.5.1.30 swConnUnitRDYPriority 1.3.6.1.4.1.1588.2.1.1.1.27.1.17 connUnitPortStatCountBBCreditZero 1.3.6.1.3.94 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 366
connUnitPortStatCountInvalidTxWords er64_disc_c3 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.28 stat64_PRJTFrames Not supported stat64_PBSYFrames Not supported stat64_inputBuffersFull Not supported stat64_rxClass1Frames Not supported portShow command Table 137 lists the counters - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 367
100 address translation group, 38 aggregator group, 305 aggregator port group, 307 B bd MIB, 335 before loading MIBs, 8 Bridge-MIB, 313 Brocade MIB files, 7 C capability group, 86, 101 commands, 20 errShow, 5 snmpConfig, 4, 20 switchStatusPolicySet, 5 configuration group, 77, 93 configuring SNMP, 20 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 368
, 291 LLDP-EXT-DOT3-MIB, 297 LLDP-EXT-DOT3-MIB organization, 297 loading brocade MIBs, 7 M MIB loading order, 9 MIB-II object hierarchy, 25 MIB-II MIB, 57 RSTP group, 333 RSTP MIB, 333 S sensor variables, 339 service group, 230 SNMP community table, 266 SNMP configuration variables, 340 SNMP group - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 369
switchStatusPolicySet command, 5 sw-MIB system organization of MIB objects, 123 system group, 32, 141, 264 T TCP group, 45 textual conventions, 32, 59, 106, 189 toptalker group, 173 transmission group, 48 traps, 4 trunking group, 172 U UDP group, 47 understanding MIBs, 3 understanding SNMP bASICs, 2 - Dell PowerConnect Brocade M6505 | Brocade 7.1.0 Fabric OS MIB Reference - Page 370
350 Fabric OS MIB Reference 53-1002750-01
53-1002750-01
14 December 2012
®
Fabric OS
MIB Reference
Supporting Fabric OS v7.1.0