Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference - Page 114

4 fcFeConfig group Implementation of this group is mandatory. TABLE 33 Object and OID Access Description fcFabricName 1.3.6.1.3.42.2.1.1.1 fcElementName 1.3.6.1.3.42.2.1.1.2 fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 Read only Read only Read only fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 Not accessible Not accessible Read only fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 Read only fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 Read only fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 Read only fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 Read only fcFeModuleFxPortCapacity Read only 1.3.6.1.3.42.2.1.1.4.1.6 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 Read only The Name_Identifier of the fabric to which this fabric element belongs. This object returns the WWN of the primary switch in the fabric. The Name_Identifier of the fabric element. This object returns the WWN of the switch. The maximum number of modules in the fabric element, regardless of their current state. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always one for all the supported switches. A table that contains, one entry for each module in the fabric element, information of the modules. An entry containing the configuration parameters of a module. Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity. A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to "sysDescr" on page 33. The vendor's authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor "Neufe Inc." was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16 PlugInCard.' Refer to "sysObjectID" on page 33. Indicates the operational status of the module: • online (1) - The module is functioning properly. • offline (2) - The module is not available. • testing (3) - The module is under testing. • faulty (4) - The module is defective in some way. Contains the value of "sysUpTime" when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. The number of Fx_Port that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive; however, the numbers are not required to be contiguous. The Name_Identifier of the module. The return value is the WWN of the switch. 94 Fabric OS MIB Reference 53-1002750-01