Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference - Page 98

4 fcFeConfig group TABLE 27 Object and OID fcFeFabricName 1.3.6.1.2.1.75.1.1.1 fcFeElementName 1.3.6.1.2.1.75.1.1.2 fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 Access Description Read-write The Name_Identifier of the fabric to which this fabric element belongs. This object returns the WWN of the primary switch in the fabric. Read-write The Name_Identifier of the fabric element. This object returns the WWN of the switch. Read only The maximum number of modules in the fabric element, regardless of their current state. The valid value for all Brocade switches is 1. Not accessible A table that contains information about the modules, one entry for each module in the fabric element. Not accessible An entry containing the configuration parameters of a module. Not accessible Read only Read only Read only Read only Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity. This entry never shows any value as it is shown as non accessible in the browser. A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to "sysDescr" on page 33. The vendor's authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straightforward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor "Neufe Inc." was assigned the subtree 1.3.6.1.4.1.99649 and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its "FeFiFo-16 PlugInCard." Refer to "sysObjectID" on page 33. Indicates the operational status of the module. Valid values: • 1 - online, module functioning properly • 2 - offline, module not available • 3 - testing, module in test mode • 4 - faulty, module is defective Contains the value of sysUpTime when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. 78 Fabric OS MIB Reference 53-1002750-01