Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference - Page 117

fcFeOp group 4 TABLE 34 Object and OID Access Description fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 Read only The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Ports during fabric login. fcFPortAttachedPortName Read only 1.3.6.1.3.42.2.1.2.1.1.4 The port name of the attached N_Port, if applicable. If the value of this object is '0000000000000000'H, this Fx_Port has no Nx_Port attached to it. This variable has been deprecated and might be implemented for backward compatibility. fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 Read only The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is '000000'H, this Fx_Port is not engaged in a connection. This variable has been deprecated and might be implemented for backward compatibility. fcFxPortBbCreditAvailable Read only 1.3.6.1.3.42.2.1.2.1.1.6 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. fcFxPortOperMode Read only The current operational mode of the Fx_Port. 1.3.6.1.3.42.2.1.2.1.1.7 fcFxPortAdminMode Read only The desired operational mode of the Fx_Port. 1.3.6.1.3.42.2.1.2.1.1.8 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 Not A table that contains, one entry for each Fx_Port in the fabric element, accessible physical level status and parameters of the Fx_Ports. fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 Not An entry containing physical level status and parameters of an Fx_Port. accessible fcFxPortPhysModuleIndex Read only Identifies the module containing the Fx_Port for which this entry 1.3.6.1.3.42.2.1.2.3.1.1 contains information. fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 Read only Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is re-initialized. fcFxPortPhysAdminStatus Read only 1.3.6.1.3.42.2.1.2.3.1.3 The desired state of the Fx_Port: • online (1) Place port online • offline (2) Take port offline • testing (3) Initiate test procedures A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of either explicit management action or per configuration information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline state (2). Fabric OS MIB Reference 97 53-1002750-01