Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference - Page 38

1 Loading Brocade MIBs swFabricWatchTrap: YES DesiredSeverity:None swTrackChangesTrap: YES swIPv6ChangeTrap: YES swPmgrEventTrap: YES swFabricReconfigTrap: YES swFabricSegmentTrap: YES swExtTrap: YES FA-TRAP: YES connUnitStatusChange: YES connUnitDeletedTrap: YES connUnitEventTrap: YES connUnitSensorStatusChange: YES connUnitPortStatusChange: YES FICON-TRAP: YES linkRNIDDeviceRegistration: YES linkRNIDDeviceDeRegistration: YES linkLIRRListenerAdded: YES linkLIRRListenerRemoved: YES linkRLIRFailureIncident: YES HA-TRAP: YES fruStatusChanged: YES cpStatusChanged: YES fruHistoryTrap: YES ISCSI-TRAP: YES iscsiTgtLoginFailure: YES iscsiIntrLoginFailure: YES iscsiInstSessionFailure: YES IF-TRAP: YES linkDown: YES linkUp: YES BD-TRAP: YES bdTrap: YES bdClearTrap: YES To set the system group: DCX_128:FID128:admin> snmpconfig --set systemgroup Example of systemGroup configuration (default) switch:admin> snmpconfig --default systemGroup ***** This command will reset the agent's system group configuration back to factory default ***** sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support authTraps = 0 (OFF) ***** Are you sure? (yes, y, no, n): [no] y 3. Set the security level. switch:admin> snmpconfig --set secLevel Select SNMP GET Security Level (0 = No security, 1 = Authentication only, 2 = Authentication and Privacy, 3 = No Access): (0..3) [0] 2 Select SNMP SET Security Level 18 Fabric OS MIB Reference 53-1002750-01