Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference - Page 169

Switch Fabric group 6 TABLE 47 Model FC8-48 FC8-64 FC8-32E FC8-48E CP8 Core8 CR4S-8 Blade table (Continued) Temp sensors 7 sensors 8 sensors 7 sensors 7 sensors 4 sensors 4 sensors 4 sensors Switch Fabric group TABLE 48 Object and OID Access Description swFabric Not The OID sub-tree for the switch Fabric group. 1.3.6.1.4.1.1588.2.1.1.1 accessible .2 swDomainID Read-write The current Fibre Channel domain ID of the switch. To set a new value, 1.3.6.1.4.1.1588.2.1.1.1 the switch (swAdmStatus) must be in offline or testing state. .2.1 swPrincipalSwitch Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.2 Indicates whether the switch is the principal switch. Possible values are: • yes (1) • no (2) swNumNbs Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.8 The number of inter-switch links (ISLs) in the (immediate) neighborhood. swNbTable Not This table contains the ISLs in the immediate neighborhood of the switch. 1.3.6.1.4.1.1588.2.1.1.1 accessible .2.9 swNbEntry Not An entry containing each neighbor ISL parameters. 1.3.6.1.4.1.1588.2.1.1.1 accessible .2.9.1 swNbIndex Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.1 The index for neighborhood entry. swNbMyPort Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.2 This is the port that has an ISL to another switch. This value is the same as the physical port number of the local switch +1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. swNbRemDomain Read only 1.3.6.1.4.1.1588.2.1.1.1 .2.9.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW. Fabric OS MIB Reference 149 53-1002750-01