Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric OS MIB Reference - Page 119

fcFeError group 4 TABLE 34 Object and OID Access Description fcFxPortIntermixSuppAgre Read only ed 1.3.6.1.3.42.2.1.2.4.1.8 fcFxPortStackedConnMod Read only eAgreed 1.3.6.1.3.42.2.1.2.4.1.9 fcFxPortClass2SeqDelivAg Read only reed 1.3.6.1.3.42.2.1.2.4.1.10 fcFxPortClass3SeqDelivAg Read only reed 1.3.6.1.3.42.2.1.2.4.1.11 fcFxPortNxPortName Read only 1.3.6.1.3.42.2.1.2.4.1.12 fcFxPortConnectedNxPort Read only 1.3.6.1.3.42.2.1.2.4.1.13 fcFxPortBbCreditModel Read only 1.3.6.1.3.42.2.1.2.4.1.14 A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported. Valid values: • yes (1) • no (2) Indicates whether the Fx_Port has agreed to support stacked connect from the fabric login. This is only meaningful if Class 1 service has been agreed to. A variable indicating whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed. Valid values: • yes (1) • no (2) A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Valid values: • yes (1) • no (2) The port name of the attached Nx_Port, if applicable. If the value of this object is '0000000000000000'H, this Fx_Port has no Nx_Port attached to it. The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is '000000'H, this Fx_Port is not engaged in a connection. Identifies the BB_Credit model used by the Fx_Port. The regular model refers to the buffer-to-buffer flow control mechanism defined in FC-PH [1] used between the F_Port and the N_Port. For FL_Ports, the alternate buffer-to-buffer flow control mechanism as defined in FC-AL [4] is used between the FL_Port and any attached NL_Ports. fcFeError group This group consists of tables that contain information about the various types of errors detected. The management station might use the information in this group to determine the quality of the link between the Fx_Port and its attached Nx_Port. Implementation of this group is optional. Fabric OS MIB Reference 99 53-1002750-01