Dell PowerConnect W Clearpass 100 Software HP ProCurve MSM Integration Guide - Page 15
Step 1 - Enable DHCP on LAN port
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Step 1 - Enable DHCP on LAN port In our Lab environment DHCP needs to be enabled on the LAN port to provide IP addresses to both the MAP-320 and any wired clients connected to this interface of the MSM710. This is configured under Service ControllerNetworksAddress Allocation as shown in the following screen shot: CONFIDENTIAL 15
CONFIDENTIAL
15
Step 1 – Enable DHCP on LAN port
In our Lab environment DHCP needs to be enabled on the
LAN port
to provide IP addresses to
both the MAP-320 and any wired clients connected to this interface of the MSM710. This is
configured under
Service Controller
Networks
Address Allocation
as shown in the following
screen shot: