Dell PowerConnect W Clearpass 100 Software HP ProCurve MSM Integration Guide - Page 4

Test Environment The test environment referenced throughout this integration guide is based on a HP ProCurve MSM710. Although this low end hardware platform has been used, the testing and therefore this procedure is valid for all hardware variants from HP ProCurve as it is the MSM software that is providing the integration points with amigopod. The following table shows the software versions used during the integration testing. This document will be updated in the future if changes in either amigopod or HP ProCurve subsequent releases affect the stability of this integration. It is advised that the customer always check for the latest integration guide available from either amigopod or Trapeze. Date Tested: AmigoPod Version: Plugins Required: MSM Version: Integration: August 2009 Kernel2.0, Radius Services 2.0.1 Standard build only 5.2.6.2-01-7148 HTTP Captive Portal Amigopod was deployed locally on the LAN interface of the HP ProCurve controller as a VMWare image running on a test laptop. Although the VMWare image has been used the integration is equally valid for the amigopod appliance and self installing DVD deployment variants. MSM710 IP Address Internet Gateway Address amigopod IP Address amigopod RADIUS port 10.0.20.25 10.0.20.1 10.0.20.60 Auth 1812 Acc 1813 (default settings) The following diagram provides a high level overview of the test lab topology: CONFIDENTIAL 4