Dell PowerConnect W Clearpass 100 Software HP ProCurve MSM Integration Guide - Page 33
Step 2 - Confirm DHCP IP Address received, Step 3 - Confirm session detected by HP ProCurve
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Step 2 - Confirm DHCP IP Address received Using the Windows Command Prompt or equivalent in the chosen operating system, confirm that a valid IP Address has been received from the DHCP server configured on the HP ProCurve Controller. Issue the ipconfig command from the Windows Command Prompt to display the IP information received from the DHCP process. By checking on the Wireless adaptor you should be able to confirm an IP Address in the range of 192.168.1.x has been received. Note: On Mac OS X and Linux operating system variants use a Terminal window and enter the ifconfig command to display the same information. Step 3 - Confirm session detected by HP ProCurve Controller Once you have received an IP address, the HP ProCurve controller should have entry shown under the Controlled APs section of the Management Tool as shown below: CONFIDENTIAL 33