Dell PowerEdge 1800 Information Update (.pdf)
Dell PowerEdge 1800 Manual
View all Dell PowerEdge 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge 1800 manual content summary:
- Dell PowerEdge 1800 | Information Update (.pdf) - Page 1
Dell™ PowerEdge™ 1800 Systems Installing the Tower-to-Rack and Rack-to-Tower Kits www.dell.com | support.dell.com - Dell PowerEdge 1800 | Information Update (.pdf) - Page 2
- Dell PowerEdge 1800 | Information Update (.pdf) - Page 3
Dell™ PowerEdge™ 1800 Systems Installing the Tower-to-Rack and Rack-to-Tower Kits www.dell.com | support.dell.com - Dell PowerEdge 1800 | Information Update (.pdf) - Page 4
the problem. Guide. Information in this document is subject to change without notice. © 2004 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerEdge - Dell PowerEdge 1800 | Information Update (.pdf) - Page 5
Handles 10 Attaching the Slide-Shoulder Screws 10 Rack-to-Tower Kit Instructions 11 Removing the Slide-Shoulder Screws 12 Removing the Rack Handles 13 Attaching the Side Cover 13 Attaching the System Stabilizer Feet 15 Installing the Bezel 16 Stabilizing the Tower System 16 Figures Figure - Dell PowerEdge 1800 | Information Update (.pdf) - Page 6
Figure 1-12. Figure 1-13. Figure 1-14. Installing the System Side Cover 14 Attaching the System Stabilizer Feet 15 Rotating the Tower System Stabilizer Feet . . . . . 16 4 Contents - Dell PowerEdge 1800 | Information Update (.pdf) - Page 7
that provides power to the rack. The total rack load should not exceed 80 percent of the branch circuit rating. • Ensure that proper airflow is provided to components in the rack. • Do not step on or stand on any system/component when servicing other components in a rack. Installing the Tower - Dell PowerEdge 1800 | Information Update (.pdf) - Page 8
www.dell.com | support.dell.com Tower-to-Rack Kit Instructions NOTE: For instructions on how to install the rack-to-tower kit, see "Rack-to-Tower Kit Instructions." This section provides instructions on how to install the tower-to-rack kit. After you install this kit on your system, see the - Dell PowerEdge 1800 | Information Update (.pdf) - Page 9
panel. Figure 1-2. Removing the Bezel keylock bezel latch Removing the System Stabilizer Feet Remove the screws that secure the system stabilizer feet to the chassis. See Figure 1-3. Installing the Tower-to-Rack and Rack-to-Tower Kits 7 - Dell PowerEdge 1800 | Information Update (.pdf) - Page 10
www.dell.com | support.dell.com Figure 1-3. Removing the System Stabilizer Feet securing screws (4) system stabilizer feet (4) Attaching the Rack-Adapter Plate 1 Remove the system's right-side cover: a Remove the two back-panel screws that secure the right-side cover to the chassis. See Figure 1-4. - Dell PowerEdge 1800 | Information Update (.pdf) - Page 11
-adapter plate with the 12 securing slots on the chassis. See Figure 1-5. b Slide the rack-adapter plate toward the front of the system. c Replace the two back-panel screws to secure the rack-adapter plate to the chassis. Figure 1-5. Installing the Rack-Adapter Plate securing slots (12) rack-adapter - Dell PowerEdge 1800 | Information Update (.pdf) - Page 12
www.dell.com | support.dell.com Attaching the Rack Handles 1 Position one rack handle on the side of the chassis so that the handle's pull-loop is nearest the top of the system. See Figure 1-6. 2 Align the three screw holes on the rack handle with the three screw holes on the side of chassis. 3 Use - Dell PowerEdge 1800 | Information Update (.pdf) - Page 13
that came with your rack for more information. Rack-to-Tower Kit Instructions NOTE: For instructions on how to install the tower-to-rack kit, see "Tower-to-Rack Kit Instructions." This section provides instructions on how to install the rack-to-tower kit. The rack-to-tower kit includes the - Dell PowerEdge 1800 | Information Update (.pdf) - Page 14
www.dell.com | support.dell.com Figure 1-8. Rack-to-Tower Kit Contents stabilizer feet (4) stabilizer-foot swivel disks (4) stabilizer-foot securing screws (4) system side cover Removing the Slide-Shoulder Screws Remove the three slide-shoulder screws from each side of the chassis. See Figure - Dell PowerEdge 1800 | Information Update (.pdf) - Page 15
hex-head Phillips screws that secure each rack handle to the chassis. See Figure 1-10. Figure 1-10. Removing the Rack Handles rack handles (2) the chassis. See Figure 1-11. b Slide the rack-adapter plate toward the back of the system and then lift it away from the chassis. Installing the Tower-to - Dell PowerEdge 1800 | Information Update (.pdf) - Page 16
www.dell.com | support.dell.com Figure 1-11. Removing the Rack-Adapter Plate rack-adapter plate back-panel screws (2) 2 Install the system side cover: a Align the 16 securing tabs on the side edges and the front edge of the side cover with the 16 securing slots on the chassis. See Figure 1-12. b - Dell PowerEdge 1800 | Information Update (.pdf) - Page 17
when the inner-disk tab on the swivel disk inserts into the swivel slot on the stabilizer foot. See Figure 1-13. 3 Attach the stabilizer feet to the left side of the chassis: a Position (4) inner-disk tab system stabilizer feet (4) swivel slot Installing the Tower-to-Rack and Rack-to-Tower Kits 15 - Dell PowerEdge 1800 | Information Update (.pdf) - Page 18
www.dell.com | support.dell.com Installing the Bezel 1 Insert the two tabs on the inside left rotated outward before you operate the system. See Figure 1-14. Figure 1-14. Rotating the Tower System Stabilizer Feet tower system stabilizer feet (4) 16 Installing the Tower-to-Rack and Rack-to-Tower - Dell PowerEdge 1800 | Information Update (.pdf) - Page 19
Printed in the U.S.A. - Dell PowerEdge 1800 | Information Update (.pdf) - Page 20
www.dell.com | support.dell.com
Dellâ„¢ PowerEdgeâ„¢ 1800 Systems
Installing the
Tower-to-Rack and
Rack-to-Tower Kits