Dell PowerEdge 1800 Information Update (.pdf) - Page 8
Tower-to-Rack Kit Instructions, Removing the Bezel - support
View all Dell PowerEdge 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
www.dell.com | support.dell.com Tower-to-Rack Kit Instructions NOTE: For instructions on how to install the rack-to-tower kit, see "Rack-to-Tower Kit Instructions." This section provides instructions on how to install the tower-to-rack kit. After you install this kit on your system, see the documentation that came with your rack kit for instructions on how to install the system into the rack. The tower-to-rack kit includes the items listed below. See Figure 1-1. • Two rack handles with attached thumbscrews. • One rack-adapter plate. • Six hex-head Phillips screws. • Six slide-shoulder screws. Figure 1-1. Tower-to-Rack Kit Contents rack handles (2) rack-adapter plate slide-shoulder screws (6) hex-head Phillips screws (6) Removing the Bezel 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Rotate the four bottom-panel system stabilizer feet inward. and lay the system on its side. See Figure 1-2. 3 Use the system key to unlock the front bezel. 4 Slide the latch down and pull the right edge of the bezel away from the front panel. 6 Installing the Tower-to-Rack and Rack-to-Tower Kits