Dell PowerEdge 1800 Information Update (.pdf) - Page 18
Installing the Bezel, Use the system key to lock the bezel.
View all Dell PowerEdge 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
www.dell.com | support.dell.com Installing the Bezel 1 Insert the two tabs on the inside left edge of the bezel into the corresponding slots on the system front panel, and pivot the bezel inward to its closed position. NOTE: When you are closing the right side of the rack-mount system's bezel, hold the bezel's left side so that the inside bezel tabs remain properly engaged in the front-panel bezel slots. 2 Use the system key to lock the bezel. Stabilizing the Tower System CAUTION: The tower system has four stabilizer feet on its bottom panel that can be rotated outward to help properly stabilize the system. Ensure that the four stabilizer feet are rotated outward before you operate the system. See Figure 1-14. Figure 1-14. Rotating the Tower System Stabilizer Feet tower system stabilizer feet (4) 16 Installing the Tower-to-Rack and Rack-to-Tower Kits