Dell PowerEdge 1800 Information Update (.pdf) - Page 12

www.dell.com | support.dell.com Attaching the Rack Handles 1 Position one rack handle on the side of the chassis so that the handle's pull-loop is nearest the top of the system. See Figure 1-6. 2 Align the three screw holes on the rack handle with the three screw holes on the side of chassis. 3 Use three of the hex-head Phillips screws that are supplied with your kit to secure the rack handle to the chassis. NOTE: To obtain proper alignment of the rack handle, tighten the top screw first, the bottom screw second, and the middle screw last. 4 Repeat step 1 through step 3 to attach the other rack handle. Figure 1-6. Installing the Rack Handles rack handles (2) hex-head Phillips screws (6) pull-loop Attaching the Slide-Shoulder Screws Your kit includes six shoulder screws that enable the system to be attached to rack slides. Attach three slide-shoulder screws to each side of the chassis. See Figure 1-7. 10 Installing the Tower-to-Rack and Rack-to-Tower Kits