Dell PowerEdge 1800 Information Update (.pdf) - Page 10
Attaching the Rack-Adapter Plate,
View all Dell PowerEdge 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
www.dell.com | support.dell.com Figure 1-3. Removing the System Stabilizer Feet securing screws (4) system stabilizer feet (4) Attaching the Rack-Adapter Plate 1 Remove the system's right-side cover: a Remove the two back-panel screws that secure the right-side cover to the chassis. See Figure 1-4. b Slide the right-side cover toward the back of the system and then lift it away from the chassis. 8 Installing the Tower-to-Rack and Rack-to-Tower Kits
8
Installing the Tower-to-Rack and Rack-to-Tower Kits
www.dell.com | support.dell.com
Figure 1-3.
Removing the System Stabilizer Feet
Attaching the Rack-Adapter Plate
1
Remove the system’s right-side cover:
a
Remove the two back-panel screws that secure the right-side cover to the chassis. See
Figure 1-4.
b
Slide the right-side cover toward the back of the system and then lift it away from the
chassis.
system stabilizer feet (4)
securing screws (4)