Dell PowerEdge 1800 Information Update (.pdf) - Page 15
Removing the Rack Handles, Attaching the Side Cover,
View all Dell PowerEdge 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Removing the Rack Handles Remove the three hex-head Phillips screws that secure each rack handle to the chassis. See Figure 1-10. Figure 1-10. Removing the Rack Handles rack handles (2) hex-head Phillips screws (6) Attaching the Side Cover 1 Remove the rack-adapter plate: a Remove the two back-panel screws that secure the rack-adapter plate to the chassis. See Figure 1-11. b Slide the rack-adapter plate toward the back of the system and then lift it away from the chassis. Installing the Tower-to-Rack and Rack-to-Tower Kits 13
Installing the Tower-to-Rack and Rack-to-Tower Kits
13
Removing the Rack Handles
Remove the three hex-head Phillips screws that secure each rack handle to the chassis. See
Figure 1-10.
Figure 1-10.
Removing the Rack Handles
Attaching the Side Cover
1
Remove the rack-adapter plate:
a
Remove the two back-panel screws that secure the rack-adapter plate to the chassis. See
Figure 1-11.
b
Slide the rack-adapter plate toward the back of the system and then lift it away from the
chassis.
rack handles (2)
hex-head Phillips
screws (6)