Dell PowerEdge 1950 Information Update - Page 15
LCD Status Messages Update - hard drive
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Table 1-1. System Messages (continued) Message Causes Corrective Actions Warning: The installed memory configuration is not optimal. For more information on valid memory configurations, please see the system documentation on the technical support web site. Invalid memory configuration. The system runs but with reduced functionality. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" in the Hardware Owner's Manual. If the problem persists, see "Troubleshooting System Memory" in the Hardware Owner's Manual. Write fault Write fault on selected drive Faulty USB device, USB medium, optical drive assembly, hard drive, or hard-drive subsystem. Replace the faulty media. Reseat the USB device or USB cable. For hard drive problems, see "Troubleshooting a Hard Drive" in the Hardware Owner's Manual. LCD Status Messages Update Table 1-2 lists updates to the LCD status messages that can occur on the PowerEdge 1950 III system and the probable cause for each message. The LCD messages refer to events recorded in the system event log (SEL). For information on the SEL and configuring system management settings, see your systems management software documentation. Information Update 15