Dell PowerEdge 1950 Information Update - Page 7
Using the System Setup, Program in - manual
View all Dell PowerEdge 1950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Figure 1-1. Internal USB Connector Location 1 2 1 system board 2 internal USB connector location To boot from the USB memory key, you must configure the USB memory key with a boot image and then specify the USB memory key in the boot sequence in the System Setup program. See "Using the System Setup Program" in the Hardware Owner's Manual. For information on creating a bootable file on the USB memory key, see the user documentation that accompanied the USB memory key. NOTE: USB keys that contain multiple LUNs (Logical Unit Numbers) must be formatted using the format utility provided by the key manufacturer. NOTE: To avoid interference with components inside the system, the USB key must conform to the following maximum dimensions: 11.68mm thick (0.46") x 24.89mm width (0.98") x 66.8mm length (2.63"). Information Update 7