Dell PowerEdge MX840c EMC PowerEdge Servers Troubleshooting Guide - Page 22
The CD or DVD Drive is showing, Tape Drive - Tape Drive [s]
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Table 13. PSA/ePSA error codes (continued) Error number (PSA and ePSA) Error message Description Steps cable and reseat the power cable to the drive. Repeat the PSA diagnostics. If a replacement working hard drive is available, see if the working hard drive is detected by the system or try the suspect drive in a working system. 2. If you have an HDD, reconnect your hard disk drive (HDD) to the system board. 3. Update to the latest BIOS version. 4. Repeat the PSA diagnostics. 5. If failure continues, contact Dell Technical Support PSA NA ePSA 2000-0151 Hard Drive - BIST --(s) The hard drive is showing an 1. If you have a replacement incorrect status in the hard drive, install it. diagnostic. Check for a firmware update for your hard drive. 2. Update to the latest BIOS version. 3. Repeat the PSA diagnostics. 4. If failure continues, contact Dell Technical Support PSA NA ePSA 2000-0152 Optical Drive - BIST --(s) The CD or DVD Drive is showing 1. Update to the latest BIOS. an incorrect status in the diagnostic. 2. Remove and reinstall your optical drive. 3. Repeat the PSA diagnostics. 4. If failure continues, contact Technical Support PSA NA ePSA 2000-0153 Hard Drive - Removable Hard Check the installation of the Drive [d] - Incorrect status = [x] removable drive, cables, and [s] connections. 1. If you have an HDD, reconnect your hard disk drive (HDD) to the system board. 2. Update to the latest BIOS version. 3. Repeat the PSA diagnostics. 4. If failure continues, contact Technical Support PSA NA ePSA 2000-0154 Tape Drive - Tape Drive [s] S/N [d], incorrect status = [d] [d] Check installation of the tape drive, cables and connections. If the error persists, ensure that the drive firmware is current. 1. Update to the latest BIOS. 2. Remove and reinstall your tape drive. 3. Repeat the PSA diagnostics. 4. If failure continues, contact Technical Support PSA NA ePSA 2000-0155 Hard Drive - Not Installed This is an error displayed when HDD is not inserted in the notebooks. 1. Update to the latest BIOS version. 2. Remove and reinstall your Hard drive. 3. Repeat the PSA diagnostics. 4. If failure continues, contact Dell Technical Support PSA 1000-0212 System board - CMOS, Location An error occurred during the = (x), Expected = (x), Found = tests that may involve the main ePSA 2000-0212 (Not used with (x) system board of the system. UEFI BIOS) 1. Update to the latest BIOS version. 2. Repeat the PSA diagnostics. 3. If failure continues, contact Dell Technical Support. 22 Running diagnostics