Dell PowerEdge R6525 iDRAC9 with Lifecycle Controller Version 3.42.42.42 Relea - Page 13

Redfish API

Page 13 highlights

Firmware update job name in Tasks Redfish API showing as "Firmware Update" Description Workaround Systems affected Tracking number While updating firmware for a component using Redfish interface through HTTP share the job name does not include the component name and is displayed as "Firmware Update". N/A All systems supported by this release. 115535 Foreign Preview not found & not able to clear the foreign config on storage controller in iDRAC Description Workaround Systems affected Tracking number iDRAC not detecting foreign configuration present on drives with unsupported RAID level while the controller is in eHBA mode. Clearing foreign configuration will not available through iDRAC web interface Use Racadm to clear the foreign config All systems supported by this release 116804 GracefulRestart performs ForcefulRestart in Redfish API Description Workaround If you perform the action GracefulRestart, system may instead perform a ForcefulRestart. 1. Use the GracefulShutdown for ResetType parameter for POST command to gracefully shut down the system. 2. Run Get on URI "Redfish/v1/Systems/System.Embedded.1/" to verify the server PowerState is set to off. 3. After verifying that the server is in OFF state, use "On" for ResetType parameter for POST command to turn on the system. Systems affected All system supported by this release. Tracking number 110588 Get operation not displaying model or serial number for PCIe devices Description Workaround Systems affected Tracking number If you perform a Get operation for a PCIe device using Redfish API, the response may not display the model and serial number of the device. N/A All system supported by this release. 111564 IP address missing in iDRAC Description Workaround If the BIOS date and time are set incorrectly while resetting iDRAC to default settings, the iDRAC's IP address may be lost. Resetting the iDRAC or AC powercycling the server recovers the iDRAC. Known issues - To be fixed in future releases 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

Firmware update job name in Tasks Redfish API
showing as "Firmware Update"
Description
While updating firmware for a component using Redfish interface through HTTP share the job name does not
include the component name and is displayed as "Firmware Update".
Workaround
N/A
Systems affected
All systems supported by this release.
Tracking number
115535
Foreign Preview not found & not able to clear the
foreign config on storage controller in iDRAC
Description
iDRAC not detecting foreign configuration present on drives with unsupported RAID level while the controller is in
eHBA mode. Clearing foreign configuration will not available through iDRAC web interface
Workaround
Use Racadm to clear the foreign config
Systems affected
All systems supported by this release
Tracking number
116804
GracefulRestart performs ForcefulRestart in
Redfish API
Description
If you perform the action GracefulRestart, system may instead perform a ForcefulRestart.
Workaround
1.
Use the GracefulShutdown for ResetType parameter for POST command to gracefully shut down the system.
2.
Run Get on URI "Redfish/v1/Systems/System.Embedded.1/" to verify the server PowerState is set to off.
3.
After verifying that the server is in OFF state, use "On" for ResetType parameter for POST command to turn
on the system.
Systems affected
All system supported by this release.
Tracking number
110588
Get operation not displaying model or serial
number for PCIe devices
Description
If you perform a Get operation for a PCIe device using Redfish API, the response may not display the model and
serial number of the device.
Workaround
N/A
Systems affected
All system supported by this release.
Tracking number
111564
IP address missing in iDRAC
Description
If the BIOS date and time are set incorrectly while resetting iDRAC to default settings, the iDRAC's IP address
may be lost.
Workaround
Resetting the iDRAC or AC powercycling the server recovers the iDRAC.
Known issues — To be fixed in future releases
13