Home » Dell Manuals » Servers » Dell PowerEdge R830 » Manual Viewer

Dell PowerEdge R830 Lifecycle Controller GUI v2.70.70.70 Users Guide - Page 76

Menu Item, Description, Alternate RTID Requestor Transaction ID Setting

View all Dell PowerEdge R830 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Menu Item QPI Speed Description Allows you to set the QuickPath Interconnect (QPI) data rate settings. By default, the QPI Speed option is set to Maximum data rate. NOTE: QPI Speed displays only when both the processors are installed. Alternate RTID (Requestor Transaction ID) Setting Allows you to allocate more RTIDs to the remote socket, increasing cache performance between the sockets or work in normal mode for NUMA. By default, the Alternate RTID (Requestor Transaction ID) Setting is set to Disabled. Virtualization Technology Allows you to enable or disable the additional hardware capabilities provided for virtualization. By default, the Virtualization Technology option is set to Enabled. Adjacent Cache Line Prefetch Allows you to optimize the system for applications that require high utilization of sequential memory access. By default, the Adjacent Cache Line Prefetch option is set to Enabled. You can disable this option for applications that require high utilization of random memory access. Hardware Prefetcher Allows you to enable or disable the hardware prefetcher. By default, the Hardware Prefetcher option is set to Enabled. DCU Streamer Prefetcher Allows you to enable or disable the Data Cache Unit (DCU) streamer prefetcher. By default, the DCU Streamer Prefetcher option is set to Enabled. DCU IP Prefetcher Allows you to enable or disable the Data Cache Unit (DCU) IP prefetcher. By default, the DCU IP Prefetcher option is set to Enabled. Execute Disable Allows you enable or disable execute disable memory protection technology. By default, the Execute Disable option is set to Enabled. Logical Processor Allows you to enable or disable the OS capability to put logical processors in the idling state in order to reduce Idling power consumption. By default, the option is set to Disabled. Number of Cores Allows you to control the number of enabled cores in each processor. By default, the Number of Cores per per Processor Processor option is set to All. Processor 64-bit Specifies if the processor(s) support 64-bit extensions. Support Processor Core Speed Displays the maximum core frequency of the processor. Processor Bus Speed Displays the bus speed of the processors. NOTE: The processor bus speed option displays only when both the processors are installed. Processor 1 NOTE: The following settings are displayed for each processor installed in the system. Family-ModelStepping Brand Level 2 Cache Level 3 Cache Number of Cores Dell Controlled Turbo Displays the family, model and stepping of the processor as defined by Intel. Displays the brand name reported by the processor. Displays the total L2 cache. Displays the total L3 cache. Displays the number of cores per processor. Allows you to control turbo engagement. This feature is also referred to as Dell Processor Acceleration Technology (DPAT). NOTE: Depending on the platform, some attributes may or may not be displayed. 76 Using the system setup and boot manager

Section	Page
Dell Lifecycle Controller GUI v2.70.70.70 User's Guide	3
Introduction	7
Using Lifecycle Controller	7
Benefits of using iDRAC with Lifecycle Controller	7
New in this release	8
Key features	8
Feature matrix	8
Licensable features in Lifecycle Controller	9
Viewing iDRAC license information	10
Other documents you may need	10
Social Media Reference	11
Accessing documents from the Dell EMC support site	11
Contacting Dell	12
Using Lifecycle Controller	13
Starting Lifecycle Controller	13
Start messages during POST, causes, and resolutions	13
Enabling Lifecycle Controller	14
Disabling Lifecycle Controller	14
Canceling Lifecycle Controller actions	14
Using Lifecycle Controller for the first time	15
Setting up Lifecycle Controller using Initial Setup Wizard	15
Specifying language and keyboard type	15
Viewing Product Overview	15
Configuring Lifecycle Controller Network Settings	15
Configuring iDRAC Network and Credentials	16
Recommended characters in user names and passwords	16
Viewing summary of network settings	17
Accessing help	17
Viewing release notes	17
Setting up Lifecycle Controller from the home page	17
Specifying language and keyboard type	17
Configuring Lifecycle Controller Network Settings	17
Lifecycle Controller features	18
Operating system deployment	20
Installing operating system	20
Using the optional RAID configuration	22
Configuring RAID using the operating system deployment wizard	22
Unattended installation	22
UEFI Secure Boot	22
Driver access	23
Installing an operating system on iSCSI LUN and FCoE LUN	23
Post reboot scenarios	23
Monitor	25
Hardware inventory view and export	25
About view and export current inventory	25
About view and export factory-shipped inventory	25
Viewing hardware inventory — current or factory shipped	26
Exporting hardware inventory — current or factory shipped	26
Exporting hardware inventory to a USB drive	27
Exporting hardware inventory to a network share	27
CIFS	27
NFS	27
Viewing or exporting hardware inventory after part replacement	28
Viewing or exporting current inventory after resetting Lifecycle Controller	28
Lifecycle Controller log	28
Viewing Lifecycle Log history	29
Exporting Lifecycle Log	30
Exporting Lifecycle Log to a USB drive	30
Exporting Lifecycle Log to a network share	30
CIFS	30
NFS	31
Adding a work note to the Lifecycle Log	31
Firmware update	32
Firmware update methods	33
Version compatibility	34
Updating firmware	34
Selecting the type of update and update source	35
Using a local drive	35
Using a DVD	35
Using a USB drive	36
Using a FTP server	36
Using a non-proxy FTP server	36
Using a proxy FTP server	37
Using a network share	37
Using single component DUPs	38
Selecting and applying updates	39
Firmware rollback	39
Rolling back to previous firmware versions	39
Comparing firmware versions	40
Updating or rolling back devices that affect Trusted Platform Module settings	40
Configure	41
System control panel access options	41
Controlling access to the front panel	41
Configuring iDRAC	42
Configuring system time and date	42
Configuring vFlash SD card	43
Enabling or disabling a vFlash SD card	43
Initializing a vFlash SD card	43
Configuring RAID	43
Foreign configuration found	44
Viewing current RAID configuration	45
Selecting a RAID controller	45
Selecting RAID levels	45
Minimum disk requirement for different RAID levels	45
Selecting physical disks	46
Setting virtual disk attributes	46
Viewing summary	47
Configuring RAID using software RAID	47
Creating a secure virtual disk on a RAID controller	48
Key encryption	49
Applying the local key on a RAID controller	49
Local key encryption mode	49
Encrypting unsecure virtual disks	49
Rekey controller with new local key	50
Removing encryption and deleting data	50
Breaking mirrored drives	50
System setup — Advanced Hardware Configuration	51
Modifying device settings	53
Collect system inventory on restart	53
Updating server inventory information	53
Configuring local FTP server	54
FTP authentication	54
Requirements for a local FTP server	54
Copying repository to a local FTP server from the Dell Server Updates DVD	54
Using Dell Repository Manager to create the repository and copy it to a local FTP server	54
Accessing updates on a local FTP server	54
Configuring a local USB drive	55
Copying repository to a local USB drive from the Dell Server Updates DVD	55
Using Dell Repository Manager to create the repository and copy to a USB drive	55
Configuring NFS and CIFS servers	55
Configuring NFS servers	55
Configuring CIFS servers	56
Conditions while configuring HTTP / HTTPS server	56
Maintain	57
Platform restore	57
About server profile backup image	57
Supported components	58
Backup server profile	59
Backing up the server profile	59
System or feature behavior during backup	59
Export server profile	60
Exporting server profile to USB drive or network share	60
System or feature behavior during export	60
Import server profile	60
Importing server profile from a vFlash SD card, network share, or USB drive	61
Importing server profile using a vFlash SD card	61
Importing server profile from a network share	62
Importing server profile from a USB drive	62
System or feature behavior during import	62
Post-import scenario	63
Importing server profile after system board replacement	63
Restoring server profile after system board replacement	63
Import server license	64
Importing server license from a network share or USB drive	64
Importing an iDRAC license from a network share	64
Importing an iDRAC license from a USB drive	65
Part replacement configuration	65
Applying firmware and configuration updates to replaced parts	65
Supported devices	66
Repurpose or retire system	66
Deleting server information	67
Hardware diagnostics	67
Performing hardware diagnostics	67
SupportAssist Collection	67
Exporting the SupportAssist Collection	68
Easy-to-use system component names	69
Using the system setup and boot manager	72
Choosing the system boot mode	72
Entering System Setup	73
Responding to error messages	73
Using the system setup navigation keys	73
System Setup options	74
System Setup Main screen	74
System BIOS screen	74
System information screen	74
Memory Settings screen	75
Processor settings screen	75
SATA Settings Screen	77
Boot Settings screen	77
Integrated devices screen	77
Serial communications screen	78
System Profile Settings screen	78
System security screen	79
Miscellaneous settings	80
System and setup password features	80
Assigning a system and setup password	81
Deleting or changing an existing system and setup password	81
Using your system password to secure your system	82
Operating with a setup password enabled	82
Entering the UEFI boot manager	82
Using the boot manager navigation keys	83
Boot Manager screen	83
UEFI Boot menu	83
Embedded systems management	84
iDRAC settings utility	84
Entering the iDRAC settings utility	84
Troubleshooting and frequently asked questions	85
Error messages	85

Match case Limit results 1 per page

Menu Item

Description

QPI Speed

Allows you to set the QuickPath Interconnect (QPI) data rate settings. By default, the

QPI Speed

option is set to

Maximum data rate

NOTE:

QPI Speed displays only when both the processors are installed.

Alternate RTID

(Requestor

Transaction ID)

Setting

Allows you to allocate more RTIDs to the remote socket, increasing cache performance between the sockets or

work in normal mode for NUMA. By default, the

Alternate RTID (Requestor Transaction ID) Setting

is set to

Disabled

Virtualization

Technology

Allows you to enable or disable the additional hardware capabilities provided for virtualization. By default, the

Virtualization Technology

option is set to

Enabled

Adjacent Cache

Line Prefetch

Allows you to optimize the system for applications that require high utilization of sequential memory access. By

default, the

Adjacent Cache Line Prefetch

option is set to

Enabled

. You can disable this option for applications

that require high utilization of random memory access.

Hardware

Prefetcher

Allows you to enable or disable the hardware prefetcher. By default, the

Hardware Prefetcher

option is set to

Enabled

DCU Streamer

Prefetcher

Allows you to enable or disable the Data Cache Unit (DCU) streamer prefetcher. By default, the

DCU Streamer

Prefetcher

option is set to

Enabled

DCU IP Prefetcher

Allows you to enable or disable the Data Cache Unit (DCU) IP prefetcher. By default, the

DCU IP Prefetcher

option is set to

Enabled

Execute Disable

Allows you enable or disable execute disable memory protection technology. By default, the

Execute Disable

option is set to

Enabled

Logical Processor

Idling

Allows you to enable or disable the OS capability to put logical processors in the idling state in order to reduce

power consumption. By default, the option is set to

Disabled

Number of Cores

per Processor

Allows you to control the number of enabled cores in each processor. By default, the

Number of Cores per

Processor

option is set to

All

Processor 64-bit

Support

Specifies if the processor(s) support 64-bit extensions.

Processor Core

Speed

Displays the maximum core frequency of the processor.

Processor Bus

Speed

Displays the bus speed of the processors.

NOTE:

The processor bus speed option displays only when both the processors are installed.

Processor 1

NOTE:

The following settings are displayed for each processor installed in the system.

Family-Model-

Stepping

Displays the family, model and stepping of the processor as defined by Intel.

Brand

Displays the brand name reported by the processor.

Level 2 Cache

Displays the total L2 cache.

Level 3 Cache

Displays the total L3 cache.

Number of Cores

Displays the number of cores per processor.

Dell Controlled

Turbo

Allows you to control turbo engagement. This feature is also referred to as Dell Processor Acceleration

Technology (DPAT).

NOTE:

Depending on the platform, some attributes may or may not be displayed.

Using the system setup and boot manager