Dell PowerEdge R860 Host Bus Adapter Users Guide HBA 355 and 350 Series - Page 18
Dell HBA multipathing using iDRAC, Dell HBA multipathing using Linux, Dell HBA multipathing using
View all Dell PowerEdge R860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Dell HBA multipathing using iDRAC iDRAC 9 maps paths together for the drives managed by the controller. In iDRAC, each physical drive is presented once on the Storage Configuration page. To determine if your drive is in a multipath configuration, select Storage > Enclosures, expand the enclosure that is in a redundant path setup, and select Advanced properties > Redundant path > Present. Dell HBA multipathing using Linux For information about configuring Dell HBA multipathing using Linux, see the Linux administration documentation. Use the Multipath-l commands to display path information. Dell HBA multipathing using VMware ESXi by default provides the VMware Native Multipathing Plug-In (NMP), which automatically maps paths and manages drives in a multipath configuration. For more information, refer to VMware documentation on NMP. 18 Multipath support on Dell HBA355e Adapter