Dell PowerEdge T20 Dell PowerEdge T20 Owners Manual - Page 39
Removing The Hard-Drive Cage, Removing A 3.5 Inch Hard Drive From The Hard-Drive
View all Dell PowerEdge T20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
11. Exit the System Setup program and reboot the system. 12. Install any software required for the hard drive operation as described in the documentation for the hard drive. Removing A 2.5 Inch Hard Drive From The Hard-Drive Cage CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. NOTE: If you install an optical drive you cannot install 2.5 inch hard drives. 1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2. Lay the system on its side, on a flat and stable surface. 3. Open the system. 4. Remove the power and data cables from the hard drive in the hard-drive cage. 5. Remove the hard-drive cage from the system. For information on removing the hard-drive cage, see Removing The Hard-Drive Cage. NOTE: If you have a 3.5 inch hard drive seated in the hard-drive cage: a. Remove the power and data cables from the hard drive. b. Remove the hard drive from the hard-drive cage. For information on removing a 3.5 inch hard drive, see Removing A 3.5 Inch Hard Drive From The Hard-Drive Cage. 6. Turn the hard-drive cage over and remove the screws securing the hard drive to the hard-drive cage. Figure 14. Removing and Installing the Hard-Drive Screws 1. hard drive 2. hard-drive screw sockets (4) 3. hard-drive screw slots (2) 39