Dell PowerEdge XE2420 EMC Technical Specifications - Page 10
Table 3. Front view of 6 x EDSFF drive system continued
View all Dell PowerEdge XE2420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Table 3. Front view of 6 x EDSFF drive system (continued) Item Ports, panels, and slots Icon 9 OCP ports 10 Ethernet ports 11 USB 3.0 port 12 iDRAC9 dedicated port 13 VGA port 14 System status indicator cable N/A port 15 System identification button For more information about the ports, see the Technical Specifications section. Description button to manually turn on or off the system. NOTE: Press the power button to gracefully shut down an ACPI-compliant operating system. The NIC ports that are integrated on the network daughter card (NDC) provide network connectivity. For more information about the supported configurations, see Technical specifications section. Use the Ethernet ports to connect Local Area Networks (LANs) to the system. For more information about the supported Ethernet ports, see Technical specifications section. The USB ports are 9-pin and 3.0-compliant. These ports enable you to connect USB devices to the system. Enables you to remotely access iDRAC. For more information, see the iDRAC User's Guide at https://www.dell.com/ idracmanuals Enables you to connect a display device to the system. For more information, see the Technical specifications section. Enables you to connect the status indicator cable and view system status when CMA is installed. The System Identification (ID) button is available on the front to identify a system in a rack by turning on the system ID button to reset iDRAC and to access BIOS using the step through mode. 10 PowerEdge XE2420 system overview