Dell PowerStore 1200T EMC PowerStore Installation and Service Guide for PowerS - Page 94
Verify the operation of a replacement DIMM, Return a faulted part, Steps, Hardware, Components
View all Dell PowerStore 1200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Figure 105. Installing the node 4. Reconnect the back-end cables and the cables to the I/O modules and network ports. 5. Pull the orange release trigger and push in gently to re-engage the locking mechanism. If the black release tab comes out when pulled, the locking mechanism is not engaged. 6. Plug in the power cable. Verify the operation of a replacement DIMM Steps 1. From PowerStore Manager, select Hardware. 2. Select the appliance where you replaced the DIMM. 3. On the Components card, under Internal View, expand the node that includes the DIMM, and then select the relevant DIMM. The status of the replacement DIMM should read Healthy. If the status is still Faulted, wait a few minutes and refresh PowerStore Manager. If the status does not change, ensure that the DIMM is correctly seated, or contact your service provider. Return a faulted part About this task For US customers, return defective material within five business days. For International customers, return defective material within 10 business days. The materials required to return your defective part are supplied with the good part shipment. Steps 1. Package the faulted part in the shipping box that contained the replacement part. 2. Ship the failed part to your service provider as described in the instructions that were included with the replacement part. 3. For more information about returning customer-replaceable parts: a. Open PowerStore Manager. b. Click Settings on the upper right of the screen. c. Click General Support. d. Under Drives, Power Supplies, and Other Parts, click Return Part. e. If your screen does not show the Return Part link, contact your service provider for instructions. 94 Base enclosure service procedures