Dell PowerStore 3200T EMC PowerStore Installation and Service Guide for PowerS - Page 55
Verify the operation of a replacement drive, Return a faulted part, Steps, Hardware, Components
View all Dell PowerStore 3200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Figure 49. Installing a 2.5" drive 5. If you are installing an NVMe NVRAM drive, push the latch cover into place. The activity light flashes to indicate that the spin-up sequence has begun. Verify the operation of a replacement drive Steps 1. From PowerStore Manager, select Hardware. 2. Select the appliance where you replaced the drive. 3. On the Components card, under Drives, expand BaseEnclosure and select the drive. The status of the replacement drive should read Healthy. If the status is still Faulted, wait a few minutes and refresh PowerStore Manager. If the status does not change, ensure that the drive is correctly seated, or contact your service provider. 4. Click Stop Blink LED. Return a faulted part About this task For US customers, return defective material within five business days. For International customers, return defective material within 10 business days. The materials required to return your defective part are supplied with the good part shipment. Base enclosure service procedures 55