Dell PowerVault 50F Dell PowerVault Switch Manager User's Guide - Page 33
Fibre Channel IP
View all Dell PowerVault 50F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Switch Name field Domain ID field Switch Disabled checkbox Network Configuration Ethernet IP field Ethernet Subnetmask field Fibre Channel IP field Fibre Channel Subnetmask field Gateway IP field Syslog Daemon IP field Switch Port Configuration field Port Disabled checkbox Commit Configuration Changes button Reset button Displays or sets the switch name. To change the name, enter a new name in this field. Displays or sets the switch domain ID. Domain IDs must be unique within a fabric. To change the domain ID, enter a new domain ID in this field. Use a number from 1 to 239 for normal operating mode (FCSW compatible) and a number from 0 to 31 for VC-encoded address format mode (backward compatible to PowerVault 50F switch). Check to disable the switch; uncheck to enable. Displays or sets the IP address for the Ethernet connection to the switch. Displays or sets the ethernet subnetmask. The default value is none. Contact your network administrator for the value to enter. If you change the value, restart your browser. Displays or sets the Fibre Channel IP address. Displays or sets Fibre Channel subnetmask. If you change the value, restart your browser. Displays or sets the gateway IP address. Contact your network administrator for the IP address. If you change the value, restart your browser. Displays or sets the destination station IP address for sending events using syslog protocol to host. Contact your network administrator for the IP address. If checked, the port is disabled. To enable the port, uncheck the box. Click to apply the changes you made. Click to reset all components to the values present when you launched the Switch Administration. support.dell.com Using the Dell PowerVault Switch Manager 2-23