Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 35

• Ping a destination host • Perform basic troubleshooting • Configure TCP packet filter operations based on port type, packet size, file size, and host • Test network performance between any designated client and server on the network Network Command Usage This topic introduces the network command usage: • network --show • network --restart • network --setdhcp • network --setstatic_ip [options] • network --setdns [options] • network --setbonding [options] • network --nslookup [options] • network --traceroute [options] • network --ping [options] • network --troubleshoot [options] • network --tcpdump [options] • network --iperf_client [options] • network --iperf_server [options] • network --help NOTE: If you specify a command without supplying the expected value or option, you will be prompted to provide the correct value or option. network --show Description Displays the current networking configuration for a DR Series system. Syntax network --show Result Device Boot protocol IP Addr Netmask Gateway MAC Addr MTU Bonding options Slave Interfaces eth0 MAC eth0 Max Speed eth0 Speed eth0 Duplex eth1 MAC eth1 Max Speed : bond0 : dhcp : 10.20.24.55 : 255.255.252.0 : 10.20.32.13 : 78:2B:CB:47:D0:08 : 1500 : "mode=balance-alb miimon=100 xmit_hash_policy=2" : eth0,eth1,eth2,eth3 : 78:2B:CB:47:D0:08 : 1000baseT/Full : 1000Mb/s : Full : 00:50:56:93:5A:02 : 1000baseT/Full 35