Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 76
Telnet State
![]() |
View all Dell PowerVault Storage Area Network manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Syntax system --setlogin Result Please enter administrator password: Please enter administrator's new password: Please re-enter administrator's new password: Changed administrator's password. system --telnet [--enable] [--disable] Description Displays the current telnet access status, or you can use the command options to enable or disable telnet access for a DR Series system. Syntax system --telnet Result Telnet State : Disabled NOTE: In this example, the system --telnet command output showed the telnet access status as disabled. The following example shows the command for enabling telnet access on your DR Series system. To disable telnet access, use the system --telnet --disable command. system --telnet --enable Successfully enabled telnet. system --datacheck [--enable ] Enables one or both Data Check scan options that can be used on a DR Series system. You can individually enable namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace and blockmap scan types will be enabled). Description Enables an individual Data Check scan option type (or both scan types) when used in a DR Series system CLI command. Syntax system --datacheck --enable all Result Data Check configuration successful: namespace and blockmap scans currently enabled. NOTE: This example shows all Data Check scan options enabled. To enable only the namespace or only the blockmap scan, simply replace the all option with either of the other option types you desire in the DR Series system CLI command. 76
![](/manual_guide/products/dell-powervault-dr4100-dell-dr-series-command-line-reference-guide-d0f78b0/76.png)