Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 77
Use the Data Check
View all Dell PowerVault Storage Area Network manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
system --datacheck [--disable ] Disables one or both Data Check scan option types that can be used on a DR Series system. You can individually disable namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace and blockmap scan types will be disabled). Description Disables an individual Data Check scan option type (or both scan types) when used in a DR Series system CLI command. Syntax system --datacheck --disable all Result Data Check configuration successful: all scans currently disabled. NOTE: This example shows all Data Check scan options being disabled. To disable only the namespace or the blockmap scan, simply replace the all option with either of the other option types you desire in the DR Series system CLI command. system --datacheck [--throttle ] Use the Data Check --throttle option to specify the percentage of available DR Series system resources you want to use when running Data Check scans when the other system operations (data ingest, Replication, and Cleaner processes) are idle. The range is between 1 to 100 percent (%), and the default is 50%. Description Enables Data Check scans to use any percentage (1-100) of available DR Series system resource that you define. In this example, 75% of the available DR Series system resources are selected. Syntax system --datacheck --throttle 75 Result Data Check configuration successful: throttle set to 75%. system --marker [--enable] [--disable] Description Enables or disables the marker detection status for all of the supported backup software used with a DR Series system based on the option you use with the command. Syntax system --marker Result Please enter either --enable or --disable to change system-level marker settings. 77